PARKER Flared Fitting Elbow: 1/2 in OD x 3/8 in Pipe Fitting Size, Flared/Threaded
The Parker Standard Brass 45-Degree Flare Tube Fitting Elbow (MPN VS159F-8-6) is a flared/threaded brass fitting with a 1/2 in OD tube size and 3/8 in pipe fitting size, conforming to SAE J512. 3G Electric interprets…
SKU 3G-OTH-652147
Also listed as: VS159F86 · VS159F 8 6
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker Standard Brass 45-Degree Flare Tube Fitting Elbow (MPN VS159F-8-6) is a flared/threaded brass fitting with a 1/2 in OD tube size and 3/8 in pipe fitting size, conforming to SAE J512. 3G Electric interprets this demand and delivers genuine industrial fittings across 14 departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is a Parker VS159F-8-6 flared fitting elbow used for?
The Parker VS159F-8-6 is a standard brass 45-degree flare tube fitting elbow used to connect 1/2 in OD tubing to 3/8 in pipe threads in hydraulic, pneumatic, and fluid-handling systems. It meets SAE J512 standards for reliable sealing in industrial applications.
What are the specifications of the Parker VS159F-8-6?
The Parker VS159F-8-6 is a flared/threaded brass fitting with a 1/2 in OD tube size and 3/8 in pipe fitting size. It is a 45-degree elbow conforming to SAE J512. The manufacturer part number is VS159F-8-6.
Where to buy Parker VS159F-8-6 fittings worldwide?
3G Electric supplies the Parker VS159F-8-6 flared fitting elbow worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine Parker fittings across 14 departments, including combustion, pumps, and controls.
How to install a Parker flared fitting elbow?
To install a Parker flared fitting elbow, ensure the tube end is properly flared to SAE J512 specifications. Apply thread sealant to the pipe threads, hand-tighten the nut, then use a wrench to tighten an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent brass damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
