PARKER Compression Fitting Elbow: 5/16 in OD x 1/4 in OD Size
The PARKER Compression Fitting Elbow (MPN P5EU4) is a polypropylene compression tube fitting with a 5/16 in OD x 1/4 in OD size and compression x compression type. It is FDA Approved, making it suitable for…
SKU 3G-OTH-473923
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN P5EU4) is a polypropylene compression tube fitting with a 5/16 in OD x 1/4 in OD size and compression x compression type. It is FDA Approved, making it suitable for applications requiring compliance with food-grade standards.
Frequently Asked Questions
What is the PARKER Compression Fitting Elbow P5EU4 used for?
The PARKER P5EU4 is a polypropylene compression fitting elbow used to connect two tubes of different outer diameters (5/16 in and 1/4 in) in fluid or pneumatic systems. Its FDA approval makes it suitable for food-grade, pharmaceutical, and other sanitary applications where material compliance is required.
What are the specifications of the PARKER P5EU4 compression fitting?
The PARKER P5EU4 is a compression x compression elbow fitting with a 5/16 in OD x 1/4 in OD tube size. It is made of polypropylene and is FDA Approved. The manufacturer part number is P5EU4. This fitting is designed for secure, leak-resistant connections in low-pressure fluid systems.
Where to buy PARKER P5EU4 compression fittings worldwide?
3G Electric supplies the PARKER P5EU4 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial sourcing partner, we provide genuine PARKER parts and can quote for both single units and bulk orders.
How to install a PARKER polypropylene compression fitting?
To install the PARKER P5EU4, cut the tube square and deburr the end. Slide the nut and ferrule onto the tube, then insert the tube fully into the fitting body. Tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten, as polypropylene can crack. Always check for leaks after installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER polypropylene compression tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
