Parker 6A-MB6LPFA-SSP Straight-Body Stainless Steel Ball Valve
The PARKER Manual Two-Way Ball Valve (SKU 3G-OTH-436914) is a straight-body stainless steel ball valve with a 3/8 inch connection, featuring a lever handle. This valve is constructed from 316 stainless steel and has…
SKU 3G-OTH-436914
Also listed as: 6AMB6LPFASSP · 6A MB6LPFA SSP
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Manual Two-Way Ball Valve (SKU 3G-OTH-436914) is a straight-body stainless steel ball valve with a 3/8 inch connection, featuring a lever handle. This valve is constructed from 316 stainless steel and has a straight configuration with compression x compression ends, identified by manufacturer part number 6A-MB6LPFA-SSP.
Frequently Asked Questions
What is the PARKER Manual Two-Way Ball Valve used for?
The PARKER Manual Two-Way Ball Valve is used to start, stop, or redirect flow in industrial piping systems. Its 316 stainless steel construction and compression x compression ends make it suitable for corrosive fluid handling, chemical processing, and high-purity applications where reliable shut-off is required.
What are the specifications of the PARKER 6A-MB6LPFA-SSP ball valve?
This PARKER ball valve has a 3/8 inch connection size, a straight-body configuration, and compression x compression end connections. It is made of 316 stainless steel with a lever handle. The manufacturer part number is 6A-MB6LPFA-SSP, and it is a manual two-way valve designed for on/off service.
Where to buy the PARKER 6A-MB6LPFA-SSP ball valve worldwide?
3G Electric supplies the PARKER 6A-MB6LPFA-SSP ball valve worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this valve to any country.
How to install a PARKER compression ball valve?
To install a PARKER compression ball valve, ensure the pipe ends are clean and cut square. Insert the pipe fully into the compression fitting and tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Do not overtighten. Always verify the lever handle operates freely before pressurizing the system.
Used in
Common applications for ParkerParker Products
3G Electric supplies Parker straight-body stainless steel ball valves. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.