PARKER Compression Fitting Adapter: 5/16 in OD x 1/8 in Pipe Fitting Size, Compression x MNPT
The PARKER Compression Fitting Adapter (MPN 68P-5-2) is a creep-resistant self-aligning brass compression fitting, type Compression x MNPT, in a 10-pack. It connects 5/16 in OD tubing to a 1/8 in pipe fitting size…
SKU 3G-OTH-596304
Also listed as: 68P52 · 68P 5 2
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Adapter (MPN 68P-5-2) is a creep-resistant self-aligning brass compression fitting, type Compression x MNPT, in a 10-pack. It connects 5/16 in OD tubing to a 1/8 in pipe fitting size. 3G Electric interprets this demand and sources it across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the PARKER 68P-5-2 compression fitting adapter used for?
The PARKER 68P-5-2 is a creep-resistant self-aligning brass compression fitting adapter used to connect 5/16 in OD tubing to a 1/8 in pipe fitting size. It is commonly applied in pneumatic, hydraulic, and instrumentation systems where leak-free sealing and vibration resistance are required.
What are the specifications of the PARKER 68P-5-2 compression fitting?
The PARKER 68P-5-2 is a compression x MNPT adapter, 10-pack, with a 5/16 in OD tube size and 1/8 in pipe thread. It is made of creep-resistant self-aligning brass. The manufacturer part number is 68P-5-2, and the brand is PARKER.
Where to buy PARKER 68P-5-2 compression fittings worldwide?
3G Electric supplies the PARKER 68P-5-2 compression fitting adapter worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source across 14 departments and have specialist depth in combustion, pumps, and controls.
How to install a PARKER compression fitting adapter?
To install a PARKER compression fitting adapter, slide the nut and ferrule onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Avoid over-tightening to prevent creep or damage to the brass sealing surfaces.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER creep-resistant self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
