PARKER Creep-Resistant Self-Aligning Brass Compression Fitting
The PARKER Compression Fitting Sleeve (MPN 60PT-10) is a creep-resistant self-aligning brass compression fitting for 5/8 in OD tubing, supplied as a 10-pack of acetal compression sleeves. 3G Electric interprets this…
SKU 3G-OTH-596315
Also listed as: 60PT10 · 60PT 10
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Sleeve (MPN 60PT-10) is a creep-resistant self-aligning brass compression fitting for 5/8 in OD tubing, supplied as a 10-pack of acetal compression sleeves. 3G Electric interprets this demand and sources the genuine PARKER part, supporting your industrial maintenance needs across 14 departments—with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is the PARKER Compression Fitting Sleeve 60PT-10 used for?
The PARKER 60PT-10 compression fitting sleeve is used to create a leak-tight seal on 5/8 in OD tubing in industrial fluid systems. Its acetal sleeve and creep-resistant brass design ensure reliable performance in pneumatic, hydraulic, and instrumentation applications across plant maintenance.
What are the specifications of the PARKER 60PT-10 compression sleeve?
The PARKER 60PT-10 is a compression fitting sleeve for 5/8 in OD tubing, made from acetal with a creep-resistant brass body. It comes in a 10-pack. The manufacturer part number is 60PT-10, and it is designed for self-aligning installation in industrial fluid handling systems.
Where to buy PARKER 60PT-10 compression sleeves worldwide?
3G Electric supplies the genuine PARKER 60PT-10 compression sleeve worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source this part to support your maintenance needs across 14 departments, including specialist expertise in pumps and controls.
How to install PARKER compression fitting sleeves?
To install PARKER compression sleeves, slide the nut and sleeve onto the tubing, insert the tube into the fitting body until it seats, then tighten the nut by hand followed by a wrench turn per manufacturer torque specs. Always use the correct tubing size—5/8 in OD for the 60PT-10—and avoid over-tightening to prevent sleeve damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER creep-resistant self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
