PARKER Flared Fitting Adapter: 5/16 in OD x 1/4 in Pipe Fitting Size, Flared/Threaded
The Parker 48IFHD-5-4 is a standard brass inverted flare tube fitting, supplied as a flared fitting adapter with a 5/16 in OD x 1/4 in pipe fitting size. This flared/threaded adapter meets SAE J512 standards…
SKU 3G-OTH-655618
Also listed as: 48IFHD54 · 48IFHD 5 4
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 48IFHD-5-4 is a standard brass inverted flare tube fitting, supplied as a flared fitting adapter with a 5/16 in OD x 1/4 in pipe fitting size. This flared/threaded adapter meets SAE J512 standards, features a 1/2"-20 thread size A, and is sold in a 10-pack (SKU 3G-OTH-655618).
Frequently Asked Questions
What is the Parker 48IFHD-5-4 flared fitting adapter used for?
The Parker 48IFHD-5-4 is a standard brass inverted flare tube fitting used to connect 5/16 in OD tubing to a 1/4 in pipe thread port. It is commonly applied in hydraulic, pneumatic, and fuel systems where a leak-proof, vibration-resistant joint is required.
What are the specifications of the Parker 48IFHD-5-4?
The Parker 48IFHD-5-4 is a brass flared/threaded adapter with a 5/16 in OD tube size and 1/4 in pipe fitting size. It meets SAE J512 standards, has a 1/2"-20 thread size A, and is sold in a 10-pack (SKU 3G-OTH-655618).
Where to buy Parker 48IFHD-5-4 worldwide?
3G Electric supplies the Parker 48IFHD-5-4 flared fitting adapter to customers worldwide. We handle full logistics, customs clearance, and delivery to your site, ensuring you receive genuine Parker components without the hassle of multi-supplier coordination.
How to install a Parker inverted flare fitting adapter?
To install the Parker 48IFHD-5-4, apply a thin layer of thread sealant to the pipe thread end, then hand-tighten into the port. Use a wrench to tighten 1-1/2 turns past hand-tight. For the flare end, insert the tube and tighten the nut to the manufacturer's recommended torque to avoid over-compression.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass inverted flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
