PARKER Flared Fitting Elbow: 1/2 in OD x 1/2 in Pipe Fitting Size, Flared/Threaded
The Parker 48F-8-8 is a standard brass 45-degree flare tube elbow, supplied as a 10-pack. This flared/threaded fitting connects 1/2 in OD tubing to a 1/2 in pipe thread, manufactured to SAE J513 standards.
SKU 3G-OTH-652206
Also listed as: 48F88 · 48F 8 8
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 48F-8-8 is a standard brass 45-degree flare tube elbow, supplied as a 10-pack. This flared/threaded fitting connects 1/2 in OD tubing to a 1/2 in pipe thread, manufactured to SAE J513 standards.
Frequently Asked Questions
What is the Parker 48F-8-8 flared fitting elbow used for?
The Parker 48F-8-8 is a standard brass 45-degree flare tube elbow used to connect 1/2 in OD tubing to a 1/2 in pipe thread in hydraulic and pneumatic systems. It is commonly applied in industrial fluid power, instrumentation, and refrigeration circuits where a leak-tight, reusable joint is required.
What are the specifications of the Parker 48F-8-8?
The Parker 48F-8-8 is a flared/threaded brass fitting with a 1/2 in OD tube size and 1/2 in pipe thread. It is a 45-degree elbow supplied as a 10-pack and manufactured to SAE J513 standards. The manufacturer part number is 48F-8-8.
Where to buy Parker 48F-8-8 flared fitting elbows worldwide?
3G Electric supplies the Parker 48F-8-8 flared fitting elbow to customers worldwide. As a global industrial sourcing partner, we handle logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this 10-pack of brass 45-degree flare tube fittings.
How to install a Parker 48F-8-8 flared fitting elbow?
To install the Parker 48F-8-8, first cut the tubing square and deburr the end. Slide the flare nut onto the tube, then use a flaring tool to create a 45-degree flare per SAE J513. Thread the nut onto the fitting body and tighten to the manufacturer's recommended torque. Avoid over-tightening to prevent flare distortion.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
