PARKER Flared Fitting Elbow: 3/8 in OD x 1/8 in Pipe Fitting Size, Flared/Threaded
The Parker 48F-6-2 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 3/8-inch OD tubing to a 1/8-inch pipe thread, with a flared/threaded design meeting SAE J513 standards.
SKU 3G-OTH-652136
Also listed as: 48F62 · 48F 6 2
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 48F-6-2 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 3/8-inch OD tubing to a 1/8-inch pipe thread, with a flared/threaded design meeting SAE J513 standards.
Frequently Asked Questions
What is the Parker 48F-6-2 flared fitting elbow used for?
The Parker 48F-6-2 is a standard brass 45-degree flare tube fitting elbow used to connect 3/8-inch OD tubing to a 1/8-inch pipe thread in hydraulic, pneumatic, and fluid transfer systems. It is commonly applied in industrial machinery, instrumentation, and process control lines where leak-free connections are required.
What are the specifications of the Parker 48F-6-2?
The Parker 48F-6-2 is a flared/threaded brass elbow fitting with a 3/8-inch OD tube size and 1/8-inch pipe thread. It meets SAE J513 standards and is supplied as a 10-pack. The 45-degree angle allows for directional changes in tight spaces while maintaining flow integrity.
Where to buy Parker 48F-6-2 flared fitting elbow worldwide?
3G Electric supplies the Parker 48F-6-2 flared fitting elbow worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this brass 45-degree flare tube fitting.
How to install a Parker flared fitting elbow?
To install the Parker 48F-6-2, first cut tubing squarely and deburr the end. Slide the flare nut onto the tube, then use a flaring tool to create a 45-degree flare. Apply thread sealant to the pipe thread, hand-tighten the nut, then torque to SAE J513 specifications. Avoid over-tightening to prevent flare distortion.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
