PARKER Flared Fitting Elbow: 1/4 in OD x 1/4 in Pipe Fitting Size, Flared/Threaded
The Parker 48F-4-4 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 1/4 in OD tubing to a 1/4 in pipe thread, with a flared/threaded design meeting SAE J512 standards.
SKU 3G-OTH-652287
Also listed as: 48F44 · 48F 4 4
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 48F-4-4 is a standard brass 45-degree flare tube fitting elbow, supplied as a 10-pack. It connects 1/4 in OD tubing to a 1/4 in pipe thread, with a flared/threaded design meeting SAE J512 standards.
Frequently Asked Questions
What is the Parker 48F-4-4 flared fitting elbow used for?
The Parker 48F-4-4 is a standard brass 45-degree flare tube fitting elbow used to connect 1/4 in OD tubing to a 1/4 in pipe thread in hydraulic and pneumatic systems. It is commonly applied in fluid power, instrumentation, and industrial plumbing circuits requiring a leak-resistant, flared/threaded joint.
What are the specifications of the Parker 48F-4-4?
The Parker 48F-4-4 is a brass 45-degree flared fitting elbow supplied as a 10-pack. It has a 1/4 in OD tube size and 1/4 in pipe thread size, with a flared/threaded connection type. It meets SAE J512 standards for flare tube fittings, ensuring dimensional and performance consistency.
Where to buy the Parker 48F-4-4 in worldwide?
3G Electric supplies the Parker 48F-4-4 flared fitting elbow to customers worldwide. As a global industrial sourcing partner, we handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this SAE J512 brass fitting.
How to install a Parker 48F-4-4 flared fitting?
To install the Parker 48F-4-4, first cut the tubing square and deburr the end. Slide the flare nut onto the tube, then use a flaring tool to create a 45-degree flare. Align the flared tube end with the fitting seat and tighten the nut to the manufacturer's recommended torque. Avoid over-tightening to prevent damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
