PARKER Standard Brass 45-Degree Flare Tube Elbow
The Parker 48F-10-12 is a standard brass 45-degree flare tube elbow, supplied as a 10-pack. It connects 5/8 in OD tubing to a 3/4 in pipe thread, meeting SAE J512 standards. 3G Electric interprets this demand and…
SKU 3G-OTH-652164
Also listed as: 48F1012 · 48F 10 12
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 48F-10-12 is a standard brass 45-degree flare tube elbow, supplied as a 10-pack. It connects 5/8 in OD tubing to a 3/4 in pipe thread, meeting SAE J512 standards. 3G Electric interprets this demand and delivers genuine Parker fittings across 14 industrial departments, with specialist depth in combustion, pumps and controls.
Frequently Asked Questions
What is the Parker 48F-10-12 flared fitting elbow used for?
The Parker 48F-10-12 is a standard brass 45-degree flare tube elbow used to connect 5/8 in OD tubing to a 3/4 in pipe thread in hydraulic and pneumatic systems. It meets SAE J512 standards and is commonly applied in industrial fluid power, fuel lines, and instrumentation circuits.
What are the specifications of the Parker 48F-10-12?
The Parker 48F-10-12 is a brass flared fitting elbow with a 45-degree angle. It has a tube size of 5/8 in OD and a pipe fitting size of 3/4 in. The connection type is flared/threaded, and it complies with SAE J512 standards. Supplied as a 10-pack, MPN 48F-10-12.
Where to buy Parker 48F-10-12 fittings worldwide?
3G Electric supplies genuine Parker 48F-10-12 brass flare elbows worldwide. We interpret your demand, source the correct SAE J512 fittings, and handle full logistics and customs clearance for delivery to any global destination. Contact us for availability and lead time.
How to install a Parker flared fitting elbow?
To install a Parker 48F-10-12 brass flare elbow, ensure tubing is cut square and deburred. Slide the flare nut onto the tube, then flare the tube end using a SAE J512-compliant flaring tool. Tighten the nut onto the fitting body with two wrenches to avoid over-torquing and leakage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass 45-degree flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
