PARKER 42IFHD-5 Standard Brass Inverted Flare Tube Fitting Union
The Parker 42IFHD-5 is a standard brass inverted flare tube fitting union, sized 5/16 in OD x 5/16 in OD, with a 1/2"-20 thread size A. It meets SAE J512 standards and is sold in a pack of 10. 3G Electric interprets…
SKU 3G-OTH-655617
Also listed as: 42IFHD5 · 42IFHD 5
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker 42IFHD-5 is a standard brass inverted flare tube fitting union, sized 5/16 in OD x 5/16 in OD, with a 1/2"-20 thread size A. It meets SAE J512 standards and is sold in a pack of 10. 3G Electric interprets your demand for genuine industrial fittings, sourcing this Parker union alongside components from brands like Schneider, ABB, and SKF across 14 departments, with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is the Parker 42IFHD-5 flared fitting union used for?
The Parker 42IFHD-5 is a standard brass inverted flare tube fitting union used to connect two 5/16 in OD tubes in hydraulic or fuel systems. It meets SAE J512 standards and is commonly applied in industrial fluid power, automotive, and refrigeration lines where leak-proof, vibration-resistant joints are required.
What are the specifications of the Parker 42IFHD-5?
The Parker 42IFHD-5 is a brass inverted flare union with 5/16 in OD x 5/16 in OD fitting size and a 1/2\"-20 thread size A. It complies with SAE J512 standards and is sold in a pack of 10. The manufacturer part number is 42IFHD-5.
Where to buy Parker 42IFHD-5 fittings worldwide?
3G Electric supplies the Parker 42IFHD-5 flared fitting union to customers worldwide. We handle full logistics, customs clearance, and delivery for genuine industrial components. Contact us to source this union alongside parts from brands like Schneider, ABB, and SKF across 14 industrial departments.
How to install a Parker inverted flare tube fitting?
To install a Parker inverted flare fitting, cut the tube squarely, deburr the end, and slide the nut over the tube. Use a flaring tool to create a 45° flare on the tube end. Tighten the nut onto the fitting body with a wrench until snug—avoid over-tightening to prevent thread damage.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER standard brass inverted flare tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
