PARKER 213P-12 Hex Drive Cored Cap, 3/4 in NPT, 1000 psi, C36000 Brass
The PARKER Hex Drive Cored Cap is a threaded high-pressure pipe fitting, model 213P-12, with a 3/4 in NPT thread, 7/8 in length, and a maximum operating pressure of 1,000 psi, constructed from C36000 Brass. 3G…
SKU 3G-OTH-477338
Also listed as: 213P12 · 213P 12
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Hex Drive Cored Cap is a threaded high-pressure pipe fitting, model 213P-12, with a 3/4 in NPT thread, 7/8 in length, and a maximum operating pressure of 1,000 psi, constructed from C36000 Brass. 3G Electric interprets your demand for this genuine industrial fitting, sourcing it across our 14 departments and supplying it with specialist support in combustion, pumps, and controls.
Frequently Asked Questions
What is the PARKER 213P-12 hex drive cored cap used for?
The PARKER 213P-12 hex drive cored cap seals the end of a threaded pipe in high-pressure hydraulic or pneumatic systems. It is commonly used in industrial fluid power applications where a reliable, leak-proof closure is needed at pressures up to 1,000 psi.
What are the specifications of the PARKER 213P-12 cap?
The PARKER 213P-12 is a 3/4 in NPT threaded hex drive cored cap with a maximum operating pressure of 1,000 psi. It is 7/8 in long and made from C36000 brass. The manufacturer part number is 213P-12.
Where to buy the PARKER 213P-12 hex drive cored cap worldwide?
3G Electric supplies the genuine PARKER 213P-12 hex drive cored cap to customers worldwide. We handle full logistics, customs clearance, and delivery, sourcing this fitting across our 14 industrial departments with specialist support in combustion, pumps, and controls.
How to install a PARKER hex drive cored cap?
Apply thread sealant to the NPT threads of the PARKER cap, then hand-tighten into the female pipe end. Use a hex wrench on the drive to final-tighten to the manufacturer's recommended torque. Do not overtighten, as brass can crack. Always depressurize the system before installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER threaded high-pressure pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
