PARKER Compression Fitting Elbow: 3/16 in OD x 1/8 in Pipe Fitting Size, Compression x MNPT
The PARKER Compression Fitting Elbow (MPN 169CA-3-2) is a self-aligning brass compression fitting with a 3/16 in OD x 1/8 in Pipe Fitting Size, configured as Compression x MNPT. This component is part of our broader…
SKU 3G-OTH-470659
Also listed as: 169CA32 · 169CA 3 2
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The PARKER Compression Fitting Elbow (MPN 169CA-3-2) is a self-aligning brass compression fitting with a 3/16 in OD x 1/8 in Pipe Fitting Size, configured as Compression x MNPT. This component is part of our broader industrial solutions across 14 departments, with specialist depth in combustion, pumps, and controls as an authorised distributor for brands including PARKER.
Frequently Asked Questions
What is a PARKER compression fitting elbow used for?
A PARKER compression fitting elbow connects tubing to threaded ports at a 90° angle, creating a leak-resistant seal in pneumatic, hydraulic, and instrumentation systems. It is commonly used in industrial fluid power, process control, and lubrication applications where space is limited.
What are the specifications of the PARKER 169CA-3-2 compression fitting?
The PARKER 169CA-3-2 is a self-aligning brass compression fitting elbow with a 3/16 in OD tube size and 1/8 in pipe fitting size, configured as Compression x MNPT. It is manufactured by PARKER under MPN 169CA-3-2 and is suitable for medium-pressure fluid systems.
Where to buy PARKER compression fittings in worldwide?
3G Electric supplies PARKER compression fittings like the 169CA-3-2 to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine PARKER components and support your procurement from order to arrival.
How to install a PARKER compression fitting elbow?
To install a PARKER compression fitting elbow, slide the nut and ferrule onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer torque specs. Avoid over-tightening to prevent tube deformation. Always verify tube end is square and deburred.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER self-aligning brass compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
