PARKER Hydraulic Hose Plug: Steel, 5/8 in Fitting Size, 6,000 psi Max. Working Pressure @ 70 F
The Parker Hydraulic Hose Plug (SKU 3G-OTH-647065, MPN 10PNMLOS) is a steel plug with a 5/8 in fitting size and 1"-14 thread size, rated for 6,000 psi max working pressure at 70°F with an ORFS connection. 3G Electric…
SKU 3G-OTH-647065
Also listed as: 10 PNMLOS · 10-PNMLOS
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Parker Hydraulic Hose Plug (SKU 3G-OTH-647065, MPN 10PNMLOS) is a steel plug with a 5/8 in fitting size and 1"-14 thread size, rated for 6,000 psi max working pressure at 70°F with an ORFS connection. 3G Electric interprets your demand for this genuine industrial component, sourcing it across our 14 departments and leveraging specialist depth in pumps and controls to ensure you get the right answer, not just a catalog.
Frequently Asked Questions
What is the Parker hydraulic hose plug 10PNMLOS used for?
The Parker 10PNMLOS hydraulic hose plug seals ORFS (O-Ring Face Seal) ports in high-pressure hydraulic systems. It is commonly used in industrial machinery, mobile equipment, and fluid power circuits where a leak-tight seal is required at pressures up to 6,000 psi.
What are the specifications of the Parker 10PNMLOS hydraulic hose plug?
The Parker 10PNMLOS is a steel hydraulic hose plug with a 5/8 in fitting size, 1"-14 thread size, and ORFS connection. It has a maximum working pressure of 6,000 psi at 70°F. The manufacturer part number is 10PNMLOS.
Where to buy Parker hydraulic hose plug 10PNMLOS worldwide?
3G Electric supplies the genuine Parker 10PNMLOS hydraulic hose plug worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to order this steel ORFS plug rated for 6,000 psi.
How to install a Parker ORFS hydraulic hose plug?
Ensure the O-ring is properly seated in the groove before tightening. Use a torque wrench to tighten the plug to the manufacturer's recommended torque for the 1"-14 thread size. Avoid over-tightening to prevent O-ring damage. Always depressurize the system before installation.
Used in
Common applications for PARKERPARKER Products
3G Electric supplies PARKER hydraulic hose plugs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
