OAKTON Conductivity Calibration Solution
The OAKTON Conductivity Calibration Solution is a liquid conductivity standard supplied in a plastic bottle. This ACS-grade solution has a concentration of 447 microsiemens and a CAS number of 7732-18-5. It is…
SKU 3G-OTH-373239
Also listed as: WD0065347 · WD 00653 47
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The OAKTON Conductivity Calibration Solution is a liquid conductivity standard supplied in a plastic bottle. This ACS-grade solution has a concentration of 447 microsiemens and a CAS number of 7732-18-5. It is designed for calibrating conductivity meters and sensors.
Frequently Asked Questions
What is OAKTON Conductivity Calibration Solution used for?
OAKTON Conductivity Calibration Solution is used to calibrate conductivity meters and sensors in laboratories and industrial water-quality testing. This ACS-grade liquid standard ensures accurate readings by providing a known conductivity value of 447 microsiemens. It is essential for maintaining measurement precision in environmental, pharmaceutical, and chemical applications.
What are the specifications of OAKTON Conductivity Calibration Solution?
The OAKTON Conductivity Calibration Solution is a liquid with ACS chemical grade and a concentration of 447 microsiemens. It has CAS number 7732-18-5, comes in a 500 mL plastic bottle, and is part number WD-00653-47. The solution is supplied by OAKTON and is designed for calibrating conductivity instruments.
Where to buy OAKTON Conductivity Calibration Solution worldwide?
You can source OAKTON Conductivity Calibration Solution worldwide through 3G Electric, a global industrial equipment distributor established in 1990. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we supply this ACS-grade 447 microsiemens solution globally.
How to use OAKTON Conductivity Calibration Solution for meter calibration?
To calibrate a conductivity meter, rinse the probe with deionized water, then immerse it in the OAKTON 447 microsiemens calibration solution. Allow the reading to stabilize, then adjust the meter to match the solution's value. After calibration, rinse the probe again. Always use fresh solution and follow the meter manufacturer's instructions for best accuracy.
Used in
Common applications for OAKTONOAKTON Products
3G Electric supplies OAKTON conductivity standards. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.