MURRELEKTRONIK Single-Ended Cordset
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 female straight connector on one end and bare wire on the other. It has 5 pins, a 22 AWG wire size, a…
SKU 3G-OTH-51781
Also listed as: 7000122410150030 · 7000 12241 0150030
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The MURRELEKTRONIK Cordset is a single-ended cordset with a PVC jacket for flexing applications, featuring an M12 female straight connector on one end and bare wire on the other. It has 5 pins, a 22 AWG wire size, a 0.3 m cable length, a yellow PVC jacket, and an IP67 rating, with a maximum current of 4 A.
Frequently Asked Questions
What is the MURRELEKTRONIK 7000-12241-0150030 cordset used for?
This MURRELEKTRONIK cordset connects sensors or actuators in industrial automation, packaging, and material-handling equipment. Its M12 female straight connector and bare-wire end simplify wiring to controllers or junction boxes. The PVC jacket and IP67 rating suit flexing applications in factory-floor environments where dust and water spray are present.
What are the specifications of the MURRELEKTRONIK 7000-12241-0150030 cordset?
This single-ended cordset has an M12 female straight connector on one end and bare wire on the other. It features 5 pins, 22 AWG wire, a 0.3 m yellow PVC cable, IP67 rating, and a maximum current of 4 A. The MURRELEKTRONIK part number is 7000-12241-0150030.
Where to buy the MURRELEKTRONIK 7000-12241-0150030 cordset worldwide?
3G Electric supplies the MURRELEKTRONIK 7000-12241-0150030 cordset worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this MURRELEKTRONIK cordset to any country.
How to install the MURRELEKTRONIK M12 cordset with bare wire?
Connect the M12 female straight end to the sensor or actuator port and tighten the coupling nut by hand. Strip the bare-wire end to the recommended length (typically 6–8 mm) and terminate into a screw terminal or spring-clamp connector. Ensure the cable is routed without sharp bends to maintain the IP67 seal and flex life.
Used in
Common applications for MURRELEKTRONIKMURRELEKTRONIK Products
3G Electric supplies MURRELEKTRONIK single-ended cordsets with pvc jacket for flexing applications. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
