KIPP Rear-Mount Stainless Steel Insert with Abrasive Diamond Face
The KIPP Rear-Mount Insert w/Diamond Face is a stainless steel insert with an abrasive diamond face, 12 mm diameter and 12 mm height, featuring an M5 thread. This rear-mount insert is designed for applications…
SKU 3G-OTH-179999
Also listed as: K038512125 · K0385 12125 · K0385-12125
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The KIPP Rear-Mount Insert w/Diamond Face is a stainless steel insert with an abrasive diamond face, 12 mm diameter and 12 mm height, featuring an M5 thread. This rear-mount insert is designed for applications requiring a durable, abrasive gripping surface.
Frequently Asked Questions
What is a KIPP rear-mount insert with diamond face used for?
A KIPP rear-mount insert with diamond face is used in industrial workholding and positioning applications to provide a hard, wear-resistant gripping surface. The diamond abrasive grit helps secure parts during machining, assembly, or inspection, especially in automated or manual fixtures where slip resistance is critical.
What are the specifications of the KIPP K0385.12125 rear-mount insert?
The KIPP K0385.12125 is a rear-mount stainless steel insert with an abrasive diamond face. It has a 12 mm diameter, M5 thread, and 12 mm height. The diamond grit face provides high friction for secure part clamping. This insert is designed for use in jigs, fixtures, and modular workholding systems.
Where to buy KIPP rear-mount inserts with diamond face worldwide?
You can source KIPP rear-mount inserts with diamond face worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the KIPP K0385.12125 or other KIPP workholding components.
How to install a KIPP rear-mount insert with diamond face?
To install a KIPP rear-mount insert, first drill and tap a hole matching the M5 thread size. Clean the hole and insert, then screw the insert in using a suitable tool until it is flush with the mounting surface. Ensure the diamond face is oriented correctly for workpiece contact. Tighten to recommended torque without over-tightening.
Used in
Common applications for KIPPKIPP Products
3G Electric supplies KIPP rear-mount stainless steel inserts with abrasive diamond face. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.