JW WINCO 882-G3/4-MS-M Filter Breather Vent
The JW WINCO Breather Filter is a 10 micron filter with a brass body, 3/4" SAE thread, and Air Exchange (Blue Ring) Design (MPN 882-G3/4-MS-M). 3G Electric interprets your demand for this genuine industrial…
SKU 3G-OTH-591697
Also listed as: 882G34MSM · 882 G3 4 MS M · 882-G3-4-MS-M
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The JW WINCO Breather Filter is a 10 micron filter with a brass body, 3/4" SAE thread, and Air Exchange (Blue Ring) Design (MPN 882-G3/4-MS-M). 3G Electric interprets your demand for this genuine industrial component, sourcing it across 14 departments with specialist depth in combustion, pumps, and controls.
Frequently Asked Questions
What is a JW WINCO Breather Filter used for?
The JW WINCO Breather Filter (MPN 882-G3/4-MS-M) is used on industrial equipment to allow air exchange while filtering airborne particles down to 10 micron. It protects gearboxes, hydraulic tanks, and reservoirs from contamination, extending component life in demanding environments.
What are the specifications of the JW WINCO Breather Filter?
This JW WINCO breather filter has a brass body, 3/4" SAE thread, and a 10 micron filtration rating. It features the Air Exchange (Blue Ring) Design. The manufacturer part number is 882-G3/4-MS-M. It is designed for reliable air intake and exhaust in industrial systems.
Where to buy a JW WINCO Breather Filter worldwide?
3G Electric supplies the genuine JW WINCO Breather Filter (882-G3/4-MS-M) worldwide. We handle full logistics, customs clearance, and delivery to your facility. As a global industrial solutions provider, we source this component across 14 departments, with specialist expertise in combustion, pumps, and controls.
How to install a JW WINCO Breather Filter?
Install the JW WINCO Breather Filter by threading it into a 3/4" SAE port on your equipment. Ensure the sealing surface is clean and apply thread sealant if needed. Tighten to manufacturer torque specifications. The blue ring indicates the air exchange design; do not block the vent during operation.
Used in
Common applications for JW WINCOJW WINCO Products
3G Electric supplies JW WINCO filter breather vents. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- This forged brass tee-pattern unit integrates a ball valve and a stainless steel strainer in a single body. The 3/4 in nominal valve size provides shut-off and filtration for water, air, and light oil lines, protecting downstream equipment from debris
- QUICKFITTING Brass straight ball valve with press x press connections and lever handle. Rated for 250 psi CWP. Used for on/off flow control in plumbing, HVAC, and industrial piping systems for water, oil, and gas