JW WINCODamping Washers for Two-Piece Shaft Collars

JW WINCO Damping Washer: For GN 7072 Series, 2-Piece, For 14 mm Shafts

SKU 3G-OTH-133134

Also listed as: 70723032B14 · 7072 30 32 B14 · 7072-30-32-B14

Brand

JW WINCO

Item

Damping Washer: For GN 7072 Series, 2-Piece, For 14 mm Shafts

Local availability & support

Delivery: Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment: Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Technical Specifications

JW WINCO

Manufacturer Part Number

7072.30-32-B14 

Type

2-Piece, For 14 mm Shafts, For 32 mm Shaft Collar Dia 

Technical Documents

No technical documents available for this product.

Request documentation →

Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.

Talk to an engineer

Ask a question

JW WINCO Products

3G Electric (S) Pte. Ltd. — Singapore

Product Description

The JW WINCO Damping Washer (SKU 7072.30-32-B14, MPN 7072.30-32-B14) is a damping washer for two-piece shaft collars in the GN 7072 Series. It is designed for 14 mm shafts and 32 mm shaft collar diameters, constructed from a transparent polyurethane elastomer with an acrylate dispersion. The compatible replacement part number is 7072.3-32-B14-NI.

Frequently Asked Questions

What is the JW WINCO Damping Washer used for?

The JW WINCO Damping Washer is used to reduce vibration and noise in two-piece shaft collars of the GN 7072 Series. It fits 14 mm shafts with a 32 mm shaft collar diameter, providing a cushioning layer between collar halves for industrial motion-control applications.

What are the specifications of the JW WINCO Damping Washer?

The JW WINCO Damping Washer (MPN 7072.30-32-B14) is a 2-piece design for 14 mm shafts and 32 mm shaft collar diameters. It is made of transparent polyurethane elastomer with an acrylate dispersion. The compatible replacement part number is 7072.3-32-B14-NI.

Where to buy JW WINCO Damping Washer worldwide?

You can source the JW WINCO Damping Washer through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.

How to install the JW WINCO Damping Washer?

To install the JW WINCO Damping Washer, place it between the two halves of the GN 7072 Series shaft collar before tightening. Ensure the washer aligns with the 14 mm shaft and 32 mm collar diameter. Tighten fasteners evenly to avoid pinching the polyurethane elastomer.

Used in

Common applications for JW WINCO

Machinery assembly — JW WINCO self-locking bearing locknuts (e.g., 1804.1-M50X1.5) for securing bearings on shafts in gearboxes and conveyors.

Fixture building — JW WINCO horizontal U-latch toggle clamps (e.g., 851.3-700-T6) for quick clamping in welding jigs and assembly fixtures.

Material handling — JW WINCO quick-release hoist rings (e.g., 1135-M12-17-ST) for lifting heavy components in manufacturing cells.

Shaft positioning — JW WINCO one-piece shaft collars (e.g., 5WG46/A) for retaining bearings or acting as stops on linear motion systems.

Linkage systems — JW WINCO stainless steel clevis rod ends (e.g., 8NXBIS) for connecting pneumatic cylinders or actuators in automated equipment.

Clamping arm extension — JW WINCO rigid clamping arm extenders (e.g., 801.1-85-16-ST) for increasing reach on toggle clamps in custom fixtures.

JW WINCO Products

3G Electric supplies JW WINCO damping washers for two-piece shaft collars. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

Browse all JW WINCO products →Contact our engineers →