JOHNSON CONTROLS TE-6300W-101 Brass Direct Mount with Setscrew Thermowell
The JOHNSON CONTROLS Immersion Well is a direct-mount with setscrew HVAC thermowell made of brass for both shank and connection material. It accommodates maximum insertion/bulb lengths of 2-3/8 in and 4-2/3 in, with…
SKU 3G-OTH-68585
Also listed as: TE6300W101 · TE 6300W 101
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The JOHNSON CONTROLS Immersion Well is a direct-mount with setscrew HVAC thermowell made of brass for both shank and connection material. It accommodates maximum insertion/bulb lengths of 2-3/8 in and 4-2/3 in, with a 0.26 in inside diameter, and is identified by manufacturer part number TE-6300W-101.
Frequently Asked Questions
What is a JOHNSON CONTROLS immersion well used for?
A JOHNSON CONTROLS immersion well, such as the TE-6300W-101, protects temperature sensors in HVAC piping and tanks. It allows insertion of a bulb or probe without direct fluid contact, enabling accurate measurement while shielding the sensor from pressure, corrosion, and flow. This brass direct-mount with setscrew design is common in commercial heating and cooling systems.
What are the specifications of the JOHNSON CONTROLS TE-6300W-101 immersion well?
The JOHNSON CONTROLS TE-6300W-101 is a brass immersion well with a direct-mount with setscrew design. It has a 0.26 in inside diameter and accommodates maximum insertion/bulb lengths of 2-3/8 in and 4-2/3 in. Both shank and connection materials are brass. The manufacturer part number is TE-6300W-101.
Where to buy a JOHNSON CONTROLS TE-6300W-101 immersion well worldwide?
3G Electric supplies the JOHNSON CONTROLS TE-6300W-101 immersion well to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this brass direct-mount thermowell.
How to install a JOHNSON CONTROLS direct-mount immersion well?
Install the JOHNSON CONTROLS immersion well by threading it into a pipe or tank fitting with the setscrew oriented for access. Apply thread sealant to the brass connection. Insert the temperature sensor to the specified bulb length (2-3/8 in or 4-2/3 in) and tighten the setscrew to secure it. Always follow local codes and the manufacturer's instructions.
Used in
Common applications for JOHNSON CONTROLSJOHNSON CONTROLS Products
3G Electric supplies JOHNSON CONTROLS hvac thermowells. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.