JACO Male Elbow Compression Connector: 1/4 in OD x 1/4 in MNPT, 50 psi, White
The JACO Male Elbow Compression Connector is an acetal copolymer tube fitting designed for 1/4 in OD tubing with a 1/4 in MNPT connection, rated at 50 psi. This white fitting is USDA Listed (MPN 40-4-4-C-O)…
SKU 3G-OTH-742521
Also listed as: 4044CO · 40 4 4 C O
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The JACO Male Elbow Compression Connector is an acetal copolymer tube fitting designed for 1/4 in OD tubing with a 1/4 in MNPT connection, rated at 50 psi. This white fitting is USDA Listed (MPN 40-4-4-C-O), providing a reliable solution for low-pressure fluid handling applications.
Frequently Asked Questions
What is the JACO Male Elbow Compression Connector used for?
The JACO Male Elbow Compression Connector is used for low-pressure fluid handling applications, such as connecting 1/4 in OD tubing to a 1/4 in MNPT port in food-grade or sanitary systems. Its acetal copolymer construction and USDA Listing make it suitable for potable water and food processing lines.
What are the specifications of the JACO 40-4-4-C-O fitting?
The JACO 40-4-4-C-O is a male elbow compression connector for 1/4 in OD tubing with a 1/4 in MNPT thread, rated at 50 psi. It is made of white acetal copolymer and is USDA Listed. This fitting provides a leak-resistant seal in low-pressure pneumatic or fluid circuits.
Where to buy JACO compression fittings in worldwide?
3G Electric supplies JACO compression fittings like the 40-4-4-C-O to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote on this or any other JACO acetal copolymer tube fitting for your low-pressure fluid system.
How to install a JACO male elbow compression connector?
To install a JACO male elbow compression connector, cut the 1/4 in OD tubing square, deburr the end, and slide the nut and ferrule onto the tube. Insert the tube fully into the fitting body, then hand-tighten the nut. For the 1/4 in MNPT end, use thread sealant and tighten to 50 psi rated torque.
Used in
Common applications for JACOJACO Products
3G Electric supplies JACO acetal copolymer tube fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
