IPTCI BEARINGS SUCTF205-16 IP69K Washdown Flange-Mount Ball Bearing
The IPTCI BEARINGS 4 Bolt Flange Bearing is a washdown flange-mount radial ball bearing with a cylindrical bore and a 1 in bore size. It features a PBT plastic housing, H-1 grease lubricant, and a 3/8 in mounting…
SKU 3G-OTH-107105
Also listed as: SUCTF20516IP69K · SUCTF205 16 IP69K · SUCTF205-16-IP69K
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The IPTCI BEARINGS 4 Bolt Flange Bearing is a washdown flange-mount radial ball bearing with a cylindrical bore and a 1 in bore size. It features a PBT plastic housing, H-1 grease lubricant, and a 3/8 in mounting bolt size, with a not-split housing design. This inch-system bearing is identified by manufacturer part number SUCTF205-16 IP69K.
Frequently Asked Questions
What is the IPTCI BEARINGS 4 Bolt Flange Bearing used for?
This washdown flange-mount radial ball bearing is designed for food processing, pharmaceutical, and other sanitary environments where frequent washdowns occur. Its PBT plastic housing and H-1 grease lubricant resist corrosion and contamination, making it suitable for applications requiring IP69K-rated protection against high-pressure, high-temperature cleaning.
What are the specifications of the IPTCI BEARINGS SUCTF205-16 IP69K?
The IPTCI BEARINGS 4 Bolt Flange Bearing has a 1 in cylindrical bore, PBT plastic housing, H-1 grease lubricant, and 3/8 in mounting bolt size. It is not split, uses set screws for shaft locking, and measures 3 3/4 in length. The inch-system bearing carries manufacturer part number SUCTF205-16 IP69K.
Where to buy IPTCI BEARINGS 4 Bolt Flange Bearings worldwide?
3G Electric supplies the IPTCI BEARINGS 4 Bolt Flange Bearing (SUCTF205-16 IP69K) worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your facility. Contact us for availability and lead time on this washdown bearing.
How to install the IPTCI BEARINGS 4 Bolt Flange Bearing?
Mount the bearing on a clean, flat surface using 3/8 in bolts through the four flange holes. Align the shaft with the 1 in cylindrical bore and tighten the set screws evenly to secure the shaft. Apply light torque to avoid over-tightening the PBT plastic housing. Lubrication is pre-applied with H-1 grease.
Used in
Common applications for IPTCI BEARINGSIPTCI BEARINGS Products
3G Electric supplies IPTCI BEARINGS washdown flange-mount ball bearings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
