HUBBELL WIRING DEVICE-KELLEMS FS4 Fluorescent Light Starter, 2-Pin, 40 W Max
The HUBBELL WIRING DEVICE-KELLEMS Fluorescent Lamp Starter is a fluorescent light starter with a maximum bulb wattage of 40 W. It features 2 pins and is model FS-4 (MPN FS4). This starter is designed for use with…
SKU 3G-OTH-417403
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The HUBBELL WIRING DEVICE-KELLEMS Fluorescent Lamp Starter is a fluorescent light starter with a maximum bulb wattage of 40 W. It features 2 pins and is model FS-4 (MPN FS4). This starter is designed for use with compatible fluorescent lamps.
Frequently Asked Questions
What is the HUBBELL WIRING DEVICE-KELLEMS FS4 fluorescent lamp starter used for?
The HUBBELL WIRING DEVICE-KELLEMS FS4 fluorescent lamp starter is used to initiate the arc in compatible fluorescent lighting fixtures. It is designed for lamps up to 40 W and features 2 pins. This starter is commonly applied in commercial and industrial lighting systems where reliable starting is required.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS FS4 starter?
The HUBBELL WIRING DEVICE-KELLEMS FS4 fluorescent lamp starter has a maximum bulb wattage of 40 W and uses 2 pins. The model is FS-4 with manufacturer part number FS4. It is a standard replacement starter for compatible fluorescent lamps, ensuring proper ignition and operation.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS FS4 starter worldwide?
You can source the HUBBELL WIRING DEVICE-KELLEMS FS4 fluorescent lamp starter through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this item.
How to install the HUBBELL WIRING DEVICE-KELLEMS FS4 fluorescent lamp starter?
To install the HUBBELL WIRING DEVICE-KELLEMS FS4 starter, first disconnect power to the fixture. Remove the old starter by twisting it counterclockwise, then insert the new FS4 starter by aligning the 2 pins and twisting clockwise until secure. Restore power and test the lamp. Always follow local electrical codes.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS fluorescent light starters. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.