HANKISON Membrane Air Dryer: 3/8 in NPT, 1.4 cfm, 200 psi Max Op Pressure, 150°F Max Op Temp
The HANKISON HMM1-3F is a membrane compressed air dryer from the HMM series, featuring a 3/8 in NPT connection. It delivers a flow rate of 1.4 cfm, with a maximum operating pressure of 200 psi and a maximum operating…
SKU 3G-OTH-163023
Also listed as: HMM13F · HMM1 3F
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The HANKISON HMM1-3F is a membrane compressed air dryer from the HMM series, featuring a 3/8 in NPT connection. It delivers a flow rate of 1.4 cfm, with a maximum operating pressure of 200 psi and a maximum operating temperature of 150°F, achieving a dew point of 40°F. This unit operates in Auto mode.
Frequently Asked Questions
What is the HANKISON HMM1-3F membrane air dryer used for?
The HANKISON HMM1-3F membrane air dryer removes moisture from compressed air systems to protect pneumatic tools and equipment. It is commonly used in industrial applications requiring dry air at low flow rates, such as instrumentation, packaging, and paint spraying, where a 40°F dew point is sufficient.
What are the specifications of the HANKISON HMM1-3F membrane air dryer?
The HANKISON HMM1-3F has a 3/8 in NPT connection, a flow rate of 1.4 cfm, a maximum operating pressure of 200 psi, and a maximum operating temperature of 150°F. It achieves a 40°F dew point and operates in Auto mode. This unit is part of the HMM series from HANKISON.
Where to buy the HANKISON HMM1-3F membrane air dryer worldwide?
3G Electric supplies the HANKISON HMM1-3F membrane air dryer worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this HANKISON membrane dryer to any country.
How to install the HANKISON HMM1-3F membrane air dryer?
Install the HANKISON HMM1-3F by connecting the 3/8 in NPT inlet to your compressed air line, ensuring flow direction matches the arrow on the unit. Mount it vertically with the drain port at the bottom. Avoid exceeding 200 psi or 150°F. Follow generic membrane dryer best practices for pre-filtration to protect the membrane.
Used in
Common applications for HANKISONHANKISON Products
3G Electric supplies HANKISON membrane compressed air dryers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- Dwyer DWYER Calibration Pump: Calibration Pump, Hydraulic Test Hoses, Pumps & Pressure Kits, A-396A, NPT
- Dwyer DWYER Digital Panel Meter: 9,999 Display Span - Max, 12 V AC – 28 V AC, 12 V DC – 28 V DC, (2) SPDT (MPN DHC-009)
- Dwyer DWYER Digital Panel Meter: 9,999 Display Span - Max, 12 V AC – 28 V AC, 12 V DC – 28 V DC, (2) SPDT (MPN DHC-008)
- Dwyer DWYER Digital Panel Meter: 9,999 Display Span - Max, 12 V AC – 28 V AC, 12 V DC – 28 V DC, (2) SPDT (MPN DHC-006)
- Dwyer DWYER Photohelic Switch: Back/Single-Side, 1/8 in NPT Female, ±2% Gauge Accuracy, 3000MR, 4 in Dial (MPN 3002MR)
- Dwyer DWYER Differential Pressure Gauge: Back/Single-Side, 1/8 in NPT Female, 2000, 4 in Dial, IP67, IP67 (MPN 2000-00AV)
