HACH Hardness Solution, 20 gpg (340 mg/L), 500 mL
The HACH Hardness Solution is a calibration standard supplied as a 500 mL volume of solution with a concentration of 20 gpg (340 mg/L). This product, identified by CAS Number 50-00-0 and manufacturer part number…
SKU 3G-OTH-376323
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The HACH Hardness Solution is a calibration standard supplied as a 500 mL volume of solution with a concentration of 20 gpg (340 mg/L). This product, identified by CAS Number 50-00-0 and manufacturer part number 47949, is used as an additional calibration solution for hardness testing equipment.
Frequently Asked Questions
What is HACH Hardness Solution used for?
HACH Hardness Solution is a calibration standard used to verify and adjust the accuracy of hardness testing equipment in water quality analysis. It ensures reliable measurements in industrial, municipal, and laboratory applications where water hardness monitoring is critical.
What are the specifications of HACH Hardness Solution?
The HACH Hardness Solution is a 500 mL volume of solution with a concentration of 20 gpg (340 mg/L). It has CAS Number 50-00-0, manufacturer part number 47949, and is classified as a chemical family type solution. It is supplied as an additional calibration standard for hardness testing.
Where to buy HACH Hardness Solution worldwide?
3G Electric supplies HACH Hardness Solution worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this calibration standard.
How to use HACH Hardness Solution for calibration?
To calibrate hardness testing equipment, follow the manufacturer's instructions for your specific analyzer. Typically, pour the HACH Hardness Solution into a clean container, immerse the sensor or probe, and adjust the instrument reading to match the stated concentration of 20 gpg (340 mg/L). Always use fresh solution for each calibration.
Used in
Common applications for HACHHACH Products
3G Electric supplies HACH additional calibration solutions & standards. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- VERMONT GAGE This set of uncoated tool steel pin gauges covers diameters from 14.01 mm to 16.49 mm in 0.02 mm increments. Designed for go/no-go inspection of hole diameters in machining and quality control applications. Tolerance class ZZ with ±0.0050 mm. Manufacturer part number 102300500
- VERMONT GAGE This No-Go (Minus) pin gauge set is used to verify that hole diameters do not exceed the maximum allowable limit. Made from uncoated tool steel, it covers a range of 5.01 mm to 9.99 mm with 0.02 mm increments. The set has a ZZ tolerance class with accuracy of +/-0.0050 mm. Typical applications include quality control in manufacturing and inspection of drilled or reamed holes
- VERMONT GAGE This Go (Plus) pin gauge set is made from uncoated tool steel and covers diameters from 0.21 mm to 1.29 mm in 0.02 mm increments. It has a ZZ tolerance class with a tolerance of +/-0.0050 mm. Used for precision hole measurement and go/no-go inspection in manufacturing and quality control
- VERMONT GAGE This No-Go (Minus) pin gauge set is used for dimensional inspection of holes and bores, verifying that a hole does not exceed the maximum allowable diameter. The set covers diameters from 10.01 mm to 13.99 mm in 0.02 mm increments, made from uncoated tool steel. It is suitable for quality control applications where tight tolerances are required
- VERMONT GAGE This set of uncoated tool steel pin gauges covers diameters from 0.0065 in to 0.0605 in in 0.001 in increments. The Go (Plus) tolerance class is used to check minimum hole size limits in machining and quality control applications. Each pin is manufactured to a ZZ tolerance class with ±0.00020 in tolerance
- VERMONT GAGE This Go (Plus) pin gauge set covers diameters from 0.2515 in to 0.5005 in in 0.001 in increments. The black oxide finish provides corrosion resistance. Used for precision hole measurement and go/no-go inspection in manufacturing and quality control
