GREENLEE Knockout Draw Stud, 2 3/4 in Lg, 3/8 in Dia, 1614SSP
The GREENLEE Knockout Draw Stud (MPN 1614SSP) is a draw stud designed for use with the Greenlee QuickDraw Manual-Hydraulic system. It has a maximum sheet metal capacity of 10 ga in steel, a length of 2 3/4 inches…
SKU 3G-OTH-313684
Also listed as: 1614 SSP · 1614-SSP
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The GREENLEE Knockout Draw Stud (MPN 1614SSP) is a draw stud designed for use with the Greenlee QuickDraw Manual-Hydraulic system. It has a maximum sheet metal capacity of 10 ga in steel, a length of 2 3/4 inches, and a draw stud diameter of 3/8 inches. This component is part of the Greenlee Knockout Punch Draw Studs, Sleeve Adapters, & Locks product type.
Frequently Asked Questions
What is the GREENLEE Knockout Draw Stud 1614SSP used for?
The GREENLEE 1614SSP draw stud is used with the Greenlee QuickDraw Manual-Hydraulic system to pull a knockout punch through sheet metal. It is designed for steel up to 10 ga thickness, creating clean holes for conduit or cable installations in electrical and industrial applications.
What are the specifications of the GREENLEE 1614SSP draw stud?
The GREENLEE 1614SSP draw stud has a length of 2 3/4 inches and a draw stud diameter of 3/8 inches. It is rated for a maximum sheet metal capacity of 10 ga in steel and is part of the Greenlee QuickDraw Manual-Hydraulic system. The manufacturer part number is 1614SSP.
Where to buy the GREENLEE 1614SSP draw stud worldwide?
3G Electric supplies the GREENLEE 1614SSP draw stud to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order this genuine Greenlee component for your knockout punch system.
How to install the GREENLEE 1614SSP draw stud?
To install the GREENLEE 1614SSP draw stud, thread it into the Greenlee QuickDraw Manual-Hydraulic punch driver. Ensure the draw stud diameter of 3/8 inches matches the punch and die set. Follow standard knockout punch procedures: align the punch and die, then operate the hydraulic pump to draw the stud and punch through the material.
Used in
Common applications for GREENLEEGREENLEE Products
3G Electric supplies GREENLEE greenlee knockout punch draw studs, sleeve adapters, & locks. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.