GE Lighting Magnetic Contactor: 12 Poles, 277V AC, 30 A, 2-Wire
The GE Lighting Magnetic Contactor (MPN CR463LD0ANA) is a 12-pole, electrically held lighting contactor rated for 277V AC and 30 A, with a 2-wire control configuration. As an authorized distributor of GE and other…
SKU 3G-OTH-127932
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The GE Lighting Magnetic Contactor (MPN CR463LD0ANA) is a 12-pole, electrically held lighting contactor rated for 277V AC and 30 A, with a 2-wire control configuration. As an authorized distributor of GE and other industrial brands, 3G Electric interprets customer demand across 14 departments—including electrical components—and delivers genuine equipment with specialist support in controls.
Frequently Asked Questions
What is the GE CR463LD0ANA lighting contactor used for?
The GE CR463LD0ANA is an electrically held lighting contactor used for centralized on/off control of lighting circuits in commercial and industrial buildings. It is commonly applied in warehouses, parking lots, and office complexes to switch large banks of lights reliably from a remote 2-wire control signal.
What are the specifications of the GE CR463LD0ANA contactor?
This GE contactor has 12 poles, a coil voltage of 277V AC, and a rated current of 30 A. It is a 2-wire electrically held design, meaning the coil must remain energized to keep contacts closed. The manufacturer part number is CR463LD0ANA, and it is supplied by 3G Electric.
Where to buy the GE CR463LD0ANA contactor worldwide?
You can source the GE CR463LD0ANA contactor through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact our team for availability and lead time; we provide this GE part to facilities and contractors internationally.
How to install the GE CR463LD0ANA electrically held contactor?
Mount the contactor on a DIN rail or panel using the provided slots. Connect the 277V AC control wires to the coil terminals per the wiring diagram. Ensure the load circuit is de-energized before wiring the 12 poles. Always follow local electrical codes and the manufacturer's installation manual for safe operation.
Used in
Common applications for GEGE Products
3G Electric supplies GE electrically held lighting contactors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
