FLEETGUARD Can-Type Fuel/Water Separator FS19728
The FLEETGUARD FS19728 is a can-type fuel/water separator for trucks, including BMC Trucks, with a 14 in overall length, 3 13/16 in outside diameter, and 1 1/4 in inside diameter. Its plastic construction supports…
SKU 3G-OTH-599792
Also listed as: FS 19728 · FS-19728
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The FLEETGUARD FS19728 is a can-type fuel/water separator for trucks, including BMC Trucks, with a 14 in overall length, 3 13/16 in outside diameter, and 1 1/4 in inside diameter. Its plastic construction supports filtration in diesel fuel systems.
Frequently Asked Questions
What is the FLEETGUARD FS19728 fuel filter used for?
The FLEETGUARD FS19728 is a can-type fuel/water separator designed for diesel fuel systems in trucks, including BMC Trucks. It removes water and contaminants from fuel to protect injectors and engine components. 3G Electric supplies this genuine filter across 14 industrial departments, with specialist depth in combustion, pumps, and controls.
What are the specifications of the FLEETGUARD FS19728?
The FLEETGUARD FS19728 has a 14 in overall length, 3 13/16 in outside diameter, and 1 1/4 in inside diameter. It features a plastic construction and is designed for truck applications, including BMC Trucks. The manufacturer part number is FS19728. 3G Electric sources this genuine filter for global delivery.
Where to buy the FLEETGUARD FS19728 worldwide?
3G Electric supplies the genuine FLEETGUARD FS19728 fuel/water separator to customers worldwide. We handle full logistics, customs clearance, and delivery to your location. As a global industrial solutions provider, we interpret demand and source this filter across 14 departments, with specialist expertise in combustion, pumps, and controls.
How to install the FLEETGUARD FS19728 fuel filter?
Install the FLEETGUARD FS19728 by first draining any water from the separator bowl. Apply a thin film of clean diesel fuel to the gasket, then hand-tighten the filter until the gasket contacts the mounting head. Rotate an additional 3/4 turn. Prime the fuel system per the vehicle manufacturer's instructions. 3G Electric supplies this genuine filter for global delivery.
Used in
Common applications for FLEETGUARDFLEETGUARD Products
3G Electric supplies FLEETGUARD can-type fuel/water separators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
