EATON Comet M18 Threaded Photoelectric Sensor with Built-in M12 Connector
The EATON Comet series photoelectric sensor is a cylindrical M18 threaded sensor with a built-in connector, featuring a polyurethane body and a 4-pin M12 direct connector. It operates on a 10-30V DC supply voltage…
SKU 3G-OTH-38230
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The EATON Comet series photoelectric sensor is a cylindrical M18 threaded sensor with a built-in connector, featuring a polyurethane body and a 4-pin M12 direct connector. It operates on a 10-30V DC supply voltage, supports both NPN and PNP outputs, and carries a NEMA enclosure rating of 13.
Frequently Asked Questions
What is the EATON Comet 13104RQD07 photoelectric sensor used for?
The EATON Comet 13104RQD07 is a cylindrical M18 threaded photoelectric sensor used for object detection in industrial automation. It is suitable for packaging, material handling, and assembly lines where reliable sensing in harsh environments is required, thanks to its polyurethane body and NEMA 13 rating.
What are the specifications of the EATON 13104RQD07 sensor?
The EATON 13104RQD07 is a Comet series photoelectric sensor with an M18 threaded body, polyurethane housing, and a built-in 4-pin M12 connector. It operates on 10-30V DC supply voltage and supports both NPN and PNP outputs. Its NEMA enclosure rating is 13, making it dust-tight and protected against oil and water spray.
Where to buy the EATON 13104RQD07 sensor worldwide?
You can source the EATON 13104RQD07 photoelectric sensor through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply genuine EATON components for your automation needs.
How to install the EATON Comet M18 photoelectric sensor?
Install the EATON Comet sensor by mounting it in an M18 threaded hole, ensuring the sensing face is unobstructed. Connect the 4-pin M12 male connector to a compatible female cordset, wiring according to the NPN or PNP output configuration. Align the sensor with the target and adjust sensitivity if applicable. Follow standard industrial wiring practices for 10-30V DC systems.
Used in
Common applications for EATONEATON Products
3G Electric supplies EATON cylindrical sensors with built-in connectors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
