We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
Dayton 1-1/2 HP Fountain Pump - 1/2 HP and Above Pond & Waterfall Pumps
Dayton1/2 HP and Above Pond & Waterfall Pumps

Dayton 1-1/2 HP Fountain Pump

The Dayton is a 1 1/2 hp fountain pump with a brass housing and a 60 ft max head. It operates on 230V AC and features a 1-1/4 in NPT discharge connection.

SKU 3G-OTH-93929

Brand
Dayton
Item
1-1/2 HP Fountain Pump
Category
1/2 HP and Above Pond & Waterfall Pumps
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Delivery
Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
Warning appliesProp 65 warning
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Required — additional freight charges may applyThis item requires special shipping, additional charges may apply.

Technical Specifications

Dayton
Amps
8.5 A
UNSPSC
40151503
Frequency
60 Hz
Pump Type
Fountain Pump
Standards
CUS Certified
Duty Cycle
Continuous
Horsepower
1-1/2 hp Horsepower Horsepower (HP) is the measurement of a pump motor’s output power. It expresses the rate at which the motor works to operate the pump.
Motor Type
PSC
Cord Length
12 ft
Intake Type
Screened
Submersible
Yes
Catalog Page
2522
Overall Width
8.5 in
RPM (Maximum)
3,450 RPM
Seal Material
Buna-N; Carbon; Ceramic
Discharge Size
1-1/4 in
Discharge Type
NPT
Overall Height
8.9 in
Overall Length
15.8 in
Country of Origin
China (subject to change)
Impeller Material
Brass
Nameplate Voltage
230V AC Nameplate Voltage The pump voltage as inscribed on the pump's nameplate. The voltage class (nominal voltage) required to operate the pump may differ slightly from the nameplate voltage.
Discharge Rotation
90° Increments
Flow Rate (Maximum)
115 gpm
Flow Rate (Minimum)
90 gpm
Product Description
Pond and waterfall pumps with a motor of 1/2 HP and above achieve higher head and flow rates than pumps below 1/2 HP.
Discharge Connection
1-1/4 in NPT
Pump Housing Material
Brass
Feet of Head (Minimum)
10 ft Feet of Head (Minimum) The minimum vertical distance the pump can push fluid through pipe from the liquid source.
Solid Diameter (Maximum)
0.13 in
Electrical Connection Type
Plug-In
Thermal Overload Protection
Yes
Maximum Flow Rate @ 5 Feet of Head
117 gpm
Maximum Flow Rate @ 10 Feet of Head
115 gpm
Maximum Flow Rate @ 15 Feet of Head
109 gpm
Maximum Flow Rate @ 20 Feet of Head
102 gpm
Maximum Flow Rate @ 30 Feet of Head
90 gpm
Maximum Flow Rate @ 60 Feet of Head
0 gpm

Technical Documents

No technical documents available for this product.
Request documentation
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

Dayton Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The Dayton is a 1 1/2 hp fountain pump with a brass housing and a 60 ft max head. It operates on 230V AC and features a 1-1/4 in NPT discharge connection.

Frequently Asked Questions

What is the Dayton pond pump used for?

The Dayton is a 1 1/2 hp fountain pump designed for ponds and waterfalls. Its brass housing and 60 ft max head make it suitable for decorative water features, aeration, and circulation in commercial or residential landscapes.

What are the specifications of the Dayton pond pump?

The Dayton is a 1 1/2 hp fountain pump with a brass housing. It operates on 230V AC, has a 1-1/4 in NPT discharge connection, and delivers a 60 ft max head. The manufacturer part number is .

Where to buy the Dayton pond pump worldwide?

3G Electric supplies the Dayton pond pump worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.

How to install the Dayton pond pump?

Install the Dayton on a stable, level surface near the water source. Connect the 1-1/4 in NPT discharge line and ensure the 230V AC power supply matches the nameplate. Prime the pump before starting to prevent dry running.

Used in

Common applications for Dayton
HVAC ventilation — DAYTON centrifugal upblast roof exhaust fans (SKU 7M7U3) for kitchen exhaust systems
Mechanical power transmission — DAYTON HTD timing pulleys (SKU 404GV0) for conveyor belt drives
Process water handling — DAYTON self-priming centrifugal pumps (SKU 2ZXT4) for dewatering or transfer
Roofing and building services — DAYTON fixed ventilated roof curbs (SKU 4HX59) for filtered supply fan installations
Material handling — DAYTON latch assemblies (SKU 2KEN4) for electric chain hoist hook safety
Industrial air movement — DAYTON downblast roof exhaust fans (SKU 3HFL9) for clean air exhaust in manufacturing plants
Not sure this is the right part? Photo-identify it

Dayton Products

3G Electric supplies Dayton 1/2 hp and above pond & waterfall pumps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Pump Accessories Valves & Regulation Motors & Drives All Products

More from Dayton

View all Dayton parts
This 3/4 hp fountain pump operates on 120V AC and features a brass housing. With a 1 in NPT discharge connection and 50 ft max head, it is suited for circulating water in ponds, waterfalls, and decorative water features
Dayton
This 3/4 hp fountain pump operates on 120V AC and features a brass housing. With a 1 in NPT discharge connection and 50 ft max head, it is suited for circulating water in ponds, waterfalls, and decorative water features

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first