Dayton Sewage Ejector Pump: Single Phase, 1 hp, 230V AC, 126 gpm Flow Rate @ 10' of Head
The DAYTON Sewage Ejector Pump (SKU 3G-OTH-83648) is a single-phase, corrosion-resistant sewage ejector pump with a stainless steel impeller, rated for 230V AC. It delivers 126 gpm flow rate at 10 feet of head and…
SKU 3G-OTH-83648
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Sewage Ejector Pump (SKU 3G-OTH-83648) is a single-phase, corrosion-resistant sewage ejector pump with a stainless steel impeller, rated for 230V AC. It delivers 126 gpm flow rate at 10 feet of head and features a 2-inch MNPT discharge. This pump does not include a switch.
Frequently Asked Questions
What is the DAYTON Sewage Ejector Pump used for?
The DAYTON Sewage Ejector Pump is designed for handling sewage and wastewater in residential and commercial applications. Its corrosion-resistant construction and stainless steel impeller make it suitable for pumping effluent and solids-laden water from basements or below-grade plumbing fixtures to a higher-level sewer line.
What are the specifications of the DAYTON 3G-OTH-83648 sewage ejector pump?
The DAYTON 3G-OTH-83648 is a single-phase, 1 hp sewage ejector pump rated for 230V AC. It delivers 126 gpm flow rate at 10 feet of head and has a 2-inch MNPT discharge. The impeller is stainless steel, and the pump does not include a switch. It is corrosion-resistant for demanding wastewater environments.
Where to buy the DAYTON 3G-OTH-83648 sewage ejector pump worldwide?
3G Electric supplies the DAYTON 3G-OTH-83648 sewage ejector pump to customers worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and a quote tailored to your region.
How to install a DAYTON sewage ejector pump?
Install the DAYTON sewage ejector pump in a sump basin with a check valve on the discharge line. Ensure the 2-inch MNPT connection is properly sealed. The pump requires a 230V AC power supply and should be wired by a qualified electrician. A separate switch or control panel must be added since the pump does not include one.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton corrosion-resistant sewage ejector pumps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
