We ship worldwide — Singapore, Australia, Malaysia, Indonesia, Philippines, India, Middle East & more

3G Electric
RFQ CartGet a QuoteSign inSign up
Dayton Parallel Shaft DC Gearmotor, 90V, 29 RPM, 40 in-lb, 1/30 hp - Parallel Shaft DC Gearmotors
DaytonParallel Shaft DC Gearmotors

Dayton Parallel Shaft DC Gearmotor, 90V, 29 RPM, 40 in-lb, 1/30 hp

The DAYTON DC Gearmotor: Parallel is a parallel shaft DC gearmotor with a permanent magnet DC motor type. It operates at 90V DC, 29 RPM, with a maximum torque of 40 in-lb and an input horsepower of 1/30 hp. The motor…

SKU 3G-OTH-120736

Brand
Dayton
Item
Parallel Shaft DC Gearmotor, 90V, 29 RPM, 40 in-lb, 1/30 hp
Category
Parallel Shaft DC Gearmotors
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Delivery
Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

Dayton
Type
TENV, 29 RPM, 40 in-lb Max Torque
UNSPSC
20101617
Rotation
CW/CCW
Seal Type
O-Ring Type on Output Shaft
Standards
C-UL Recognized; UL Recognized
Gear Ratio
100:1 Gear Ratio Gear ratio indicates how many revolutions a drive gear makes in relation to a driven gear, with higher ratios ultimately lowering speed and increasing torque output.
Mfr. Model
1LPW3
Motor Type
Permanent Magnet DC
Keyway Type
Flat
Lubrication
Grease Filled
Bearing Type
Ball on Motor; Porous Bronze Sleeve on Case
Catalog Page
78
Gear Material
Acetyl; Steel
Maximum Torque
40 in-lb Maximum Torque This describes the maximum torque output of a gearmotor, measured in in.-lbs.
Overall Length
6.38 in
Motor Enclosure
Totally Enclosed Nonventilated
Nameplate Speed
29 RPM Nameplate Speed Nameplate speed describes the revolutions per minute (RPM) of a gearmotor output shaft.
Housing Material
Die Cast Zinc
Input Horsepower
1/30 hp
Country of Origin
Mexico (subject to change)
Full Load Current
0.35 A
Length Less Shaft
5.63 in
Operating Voltage
90V DC
Shaft Orientation
Parallel
Thermal Protection
None
Output Shaft Length
3/4 in
Product Description
Parallel shaft DC gearmotors use a gearbox to reduce the input speed from an electric motor, keeping the gearbox output and motor shafts parallel for compact applications.
Mounting Orientation
Any Angle
Output Shaft Diameter
5/16 in
Overhung Load Capacity
50
Housing Material Finish
Unpainted
Replaceable Motor Brushes
Yes
Maximum Ambient Temperature
40 °C

Technical Documents

(1)
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

Dayton Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The DAYTON DC Gearmotor: Parallel is a parallel shaft DC gearmotor with a permanent magnet DC motor type. It operates at 90V DC, 29 RPM, with a maximum torque of 40 in-lb and an input horsepower of 1/30 hp. The motor is TENV (Totally Enclosed Non-Ventilated) and has a full load current of 0.35 A.

Frequently Asked Questions

What is the DAYTON DC Gearmotor used for?

The DAYTON DC Gearmotor is used in industrial applications requiring precise, low-speed rotary motion, such as conveyor drives, packaging machinery, and material handling systems. Its permanent magnet DC motor and parallel shaft design deliver reliable torque at 29 RPM.

What are the specifications of the DAYTON DC Gearmotor ?

The DAYTON DC Gearmotor operates at 90V DC, 29 RPM, with a maximum torque of 40 in-lb and input horsepower of 1/30 hp. It features a permanent magnet DC motor, TENV enclosure, and full load current of 0.35 A.

Where to buy the DAYTON DC Gearmotor worldwide?

3G Electric supplies the DAYTON DC Gearmotor to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for a quote and lead time on this parallel shaft gearmotor.

How to select a DC gearmotor like the DAYTON ?

To select a DC gearmotor like the DAYTON , match the voltage (90V DC), required RPM (29), and torque (40 in-lb) to your load. Consider the duty cycle and mounting orientation. For application-specific advice, consult 3G Electric's technical team.

Used in

Common applications for Dayton
HVAC ventilation — DAYTON centrifugal upblast roof exhaust fans (SKU 7M7U3) for kitchen exhaust systems
Mechanical power transmission — DAYTON HTD timing pulleys (SKU 404GV0) for conveyor belt drives
Process water handling — DAYTON self-priming centrifugal pumps (SKU 2ZXT4) for dewatering or transfer
Roofing and building services — DAYTON fixed ventilated roof curbs (SKU 4HX59) for filtered supply fan installations
Material handling — DAYTON latch assemblies (SKU 2KEN4) for electric chain hoist hook safety
Industrial air movement — DAYTON downblast roof exhaust fans (SKU 3HFL9) for clean air exhaust in manufacturing plants
Not sure this is the right part? Photo-identify it→

Dayton Products

3G Electric supplies Dayton parallel shaft dc gearmotors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from Dayton

View all Dayton parts →
This parallel shaft DC gearmotor features a permanent magnet motor and a TENV enclosure. It operates at 24 VDC with an output speed of 8.3 RPM and delivers up to 310 in-lb of torque at 1/8 hp input. Typical applications include conveyors, packaging equipment, and material handling systems requiring low-speed, high-torque operation
Dayton
This parallel shaft DC gearmotor features a permanent magnet motor and a TENV enclosure. It operates at 24 VDC with an output speed of 8.3 RPM and delivers up to 310 in-lb of torque at 1/8 hp input. Typical applications include conveyors, packaging equipment, and material handling systems requiring low-speed, high-torque operation
This parallel shaft DC gearmotor features a permanent magnet motor and a TENV enclosure. It operates at 90V DC, delivering 9 RPM output speed with a maximum torque of 1087 in-lb and 1/4 hp input horsepower. Full load current is 2 A. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
Dayton
This parallel shaft DC gearmotor features a permanent magnet motor and a TENV enclosure. It operates at 90V DC, delivering 9 RPM output speed with a maximum torque of 1087 in-lb and 1/4 hp input horsepower. Full load current is 2 A. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
Permanent magnet DC gearmotor with parallel shaft output. TEFC enclosure. 90V DC, 5 A full load current, 40 RPM output speed, 664 in-lb maximum torque, 1/2 hp input horsepower. Used in conveyors, packaging machinery, hoists, and adjustable-speed drives requiring high torque at low speed
Dayton
Permanent magnet DC gearmotor with parallel shaft output. TEFC enclosure. 90V DC, 5 A full load current, 40 RPM output speed, 664 in-lb maximum torque, 1/2 hp input horsepower. Used in conveyors, packaging machinery, hoists, and adjustable-speed drives requiring high torque at low speed
This parallel shaft DC gearmotor features a permanent magnet DC motor with a TENV enclosure. It delivers 21 RPM output speed and up to 50 in-lb of torque at 1/30 hp input. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
Dayton
This parallel shaft DC gearmotor features a permanent magnet DC motor with a TENV enclosure. It delivers 21 RPM output speed and up to 50 in-lb of torque at 1/30 hp input. Suitable for low-speed, high-torque applications such as conveyors and material handling equipment
This parallel shaft DC gearmotor features a permanent magnet DC motor rated at 90V DC, 1/8 hp input horsepower, and 1 A full load current. It delivers 14 RPM output speed with a maximum torque of 341 in-lb. The TENV enclosure suits industrial environments. Typical applications include conveyor systems, material handling equipment, and other low-speed, high-torque positioning tasks
Dayton
This parallel shaft DC gearmotor features a permanent magnet DC motor rated at 90V DC, 1/8 hp input horsepower, and 1 A full load current. It delivers 14 RPM output speed with a maximum torque of 341 in-lb. The TENV enclosure suits industrial environments. Typical applications include conveyor systems, material handling equipment, and other low-speed, high-torque positioning tasks
This parallel shaft DC gearmotor features a permanent magnet motor operating at 90V DC with a TENV enclosure. It delivers 139 RPM output speed and a maximum torque of 42 in-lb, with an input horsepower of 1/10 hp and full load current of 1.08 A. Suitable for low-speed, high-torque applications such as conveyor drives, indexing tables, and packaging equipment
Dayton
This parallel shaft DC gearmotor features a permanent magnet motor operating at 90V DC with a TENV enclosure. It delivers 139 RPM output speed and a maximum torque of 42 in-lb, with an input horsepower of 1/10 hp and full load current of 1.08 A. Suitable for low-speed, high-torque applications such as conveyor drives, indexing tables, and packaging equipment
This permanent magnet DC gearmotor operates at 24V with a full load current of 5.45 A, delivering 30 RPM output speed and 254 in-lb maximum torque at 1/8 hp input horsepower. The TENV enclosure protects the motor in industrial environments. Typical applications include conveyor systems, material handling equipment, and other automation requiring precise speed control and moderate-load positioning
Dayton
This permanent magnet DC gearmotor operates at 24V with a full load current of 5.45 A, delivering 30 RPM output speed and 254 in-lb maximum torque at 1/8 hp input horsepower. The TENV enclosure protects the motor in industrial environments. Typical applications include conveyor systems, material handling equipment, and other automation requiring precise speed control and moderate-load positioning
Permanent magnet DC gearmotor with parallel shaft output. TENV enclosure, 90V DC input, 13 RPM output speed, 250 in-lb maximum torque, 1/15 hp input horsepower, and 0.84 A full load current. Suitable for low-speed torque applications such as conveyors, material handling, and positioning systems
Dayton
Permanent magnet DC gearmotor with parallel shaft output. TENV enclosure, 90V DC input, 13 RPM output speed, 250 in-lb maximum torque, 1/15 hp input horsepower, and 0.84 A full load current. Suitable for low-speed torque applications such as conveyors, material handling, and positioning systems

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first