Dayton 16J300SH Bushed-Bore Cast-Iron V-Belt Pulley
The DAYTON PolyV 16J300SH is a 16-groove, 3-inch OD bushed-bore cast-iron V-belt pulley with a quick-detachable SH steel bushing. 3G Electric interprets this demand and sources the exact OEM part, providing a single…
SKU 3G-OTH-123226
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DAYTON PolyV 16J300SH is a 16-groove, 3-inch OD bushed-bore cast-iron V-belt pulley with a quick-detachable SH steel bushing. 3G Electric interprets this demand and sources the exact OEM part, providing a single point of accountability across 14 industrial departments — with specialist depth in combustion, pumps and controls as a trust anchor, not a limit.
Frequently Asked Questions
What is the DAYTON PolyV 16J300SH pulley used for?
The DAYTON PolyV 16J300SH is a bushed-bore cast-iron V-belt pulley used in industrial power transmission systems. It drives multiple V-belts simultaneously in applications such as conveyors, pumps, compressors, and machine tools. Its 16-groove design handles higher torque loads, while the SH quick-detachable bushing allows fast mounting and removal without special tools.
What are the specifications of the DAYTON PolyV 16J300SH pulley?
The DAYTON PolyV 16J300SH pulley has an outside diameter of 3 inches, 16 grooves, and a bushed bore with SH quick-detachable steel bushing. The pulley industry number and manufacturer part number are both 16J300SH. It is made of cast iron for durability in continuous-duty industrial environments.
Where to buy the DAYTON PolyV 16J300SH pulley worldwide?
3G Electric supplies the DAYTON PolyV 16J300SH pulley worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this pulley to any country.
How to install a bushed-bore pulley like the DAYTON 16J300SH?
To install the DAYTON 16J300SH pulley, slide the SH quick-detachable bushing into the bore, align the keyway, and tighten the set screws evenly. Mount the assembly onto the shaft, then torque the bushing screws to the manufacturer's specification. Always verify alignment and belt tension after installation to prevent premature wear.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton bushed-bore cast-iron v-belt pulleys. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
