Datasheet Content
MAKING MODERN LIVING POSSIBLE
Data sheet
ELIMINATOR® liquid line filter drier
Types DCL and DML
All ELIMINATOR® driers have a solid core
with binding material held to an absolute
minimum.
There are two types of ELIMINATOR® cores.
Type DML driers have a core composition
of 100% Molecular Sieve, while type DCL
contain 80% Molecular Sieve with 20%
activated alumina.
ELIMINATOR® type DML driers are designed
for applications requiring the highest
moisture capacity.
ELIMINATOR® type DCL driers are designed
for applications requiring high moisture
capacity and acid adsorption capacity.
Available with solder (pure copper) and flare
connections.
Features The Core type DML The Shell
yy 100% 3Å Molecular Sieve core. yy UL approved for PS/MWP up to
yy High drying capacity minimizing the risk 46 bar/667 psig,
of acid formation (hydrolysis). yy Available with solder (pure copper) and flare
yy Recommended for use with HC, HFC and HCFC connections,
refrigerants, yy Corrosion resistant powder-painted finish.
yy Will not deplete oil additives. Special coating for marine applications
available upon request,
The Core type DCL yy Allows installation with any orientation
provided the arrow is in the flow direction,
yy 80% 3Å Molecular Sieve with 20% activated yy Available in sizes from 3 – 75 cubic inches.
alumina,
yy Perfect core blend for systems that operate at The Filter
high condensing temperatures and require
high drying capacity, yy 25 µm (0.001 in.) filter provides high retention
yy Recommended for use with HC, HFC and HCFC with minimal pressure drop,
refrigerants. yy Thermally stable up to 120 °C.
Approvals UL file no. SA 6398 Compliant with ATEX hazard zone 2
PED 97/23/EC - a3p3
Note: Only solder versions (cu-plated/pure copper)
and connection sizes below 25mm are approved for
flammable refrigerants now.
Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML
Introduction ELIMINATOR® liquid line filter driers With these contaminants eliminated, systems
protectrefrigeration and air-conditioning are safer from harmful chemical reactions
systems from moisture, acids, and solid particles. and from abrasive impurities.
Danfoss
R64-2107.10
AKS EKC
EVR
TCAE
SGN GBC GBC
DML/DCL
Technical data Surface and volume
Solid core Solid core Filter drier volume Filter drier volume
Filter surface volume (shell volume) (net volume)
[cm2] [cm3] [l] [l]
DML/DCL 03 82 41 0.08 0.038
DML/DCL 05 95 67 0.12 0.051
DML/DCL 08 131 104 0.17 0.065
Flare connection DML/DCL 16 220 234 0.36 0.122
DML/DCL 30 378 494 0.72 0.224
DML/DCL 41 510 681 0.97 0.286
DML/DCL 60 756 988 1.34 0.352
DML/DCL 75 1019 1363 1.81 0.450
Solder connection Acid capacity
(pure copper)
Acid capacity 1) Temperature range
Filter
[g] -40 – 70 °C (-40 – 160 °F)
DCL 03 0.58
DCL 05 0.87 Maximum working pressure
PS 46 bar
DCL 08 1.36
DCL 16 3.12
DCL 30 6.40
DCL 41 8.90
DCL 60 12.80
DCL 75 17.80
1)
Adsorption capacity of oleic acid at 0.05 TAN
(Total Acid Number).
Data sheet ELIMINATOR® liquid line filter drier, types DCL and DML
Technical data and capacities
Drying and liquid capacity, type DML
Drying capacity [kg] refrigerant 1) Liquid capacity [kW] 2)
R134a R404A R507 R22 R407C R410A R32
Type
[°C] R134a R404A R507 R22 R407C R410A R32
24 52 24 52 24 52 24 52 24 52 24 52 24 52
DML 032/032s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 6.70 5.01 4.86 7.45 7.09 7.43 10.86
DML 032.5s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 9.59 6.97 6.75 10.52 9.97 10.31 15.10
DML 033/033s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 12.85 9.86 9.57 14.46 13.84 14.67 21.40
DML 034s 5.0 4.7 5.3 5.1 5.4 5.0 5.0 4.7 5.0 4.6 4.5 4.2 4.6 4.2 24.71 20.12 19.57 28.60 27.65 30.13 43.78
DML 052/052s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 7.67 5.62 5.45 8.45 8.02 8.32 12.18
DML 052.5s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 9.58 7.01 6.80 10.54 10.01 10.38 15.19
DML 053/053s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 12.87 9.81 9.52 14.44 13.80 14.58 21.28
DML 054s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 25.70 20.77 20.19 29.64 28.62 31.07 45.17
DML 055s 7.9 7.5 8.5 8.1 8.6 8.0 8.0 7.4 7.9 7.3 7.2 6.6 7.3 6.7 36.22 29.07 28.25 41.63 40.15 43.45 63.19
DML 082/082s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 7.68 5.44 5.27 8.32 7.85 8.02 11.77
DML 082.5s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 10.53 7.84 7.61 11.69 11.13 11.63 17.01
DML 083/083s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 14.19 10.98 10.66 16.03 15.37 16.35 23.85
DML 084/084s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 28.61 21.33 20.68 31.76 30.24 31.63 46.24
DML 085/085s 12.6 11.9 13.6 12.9 13.8 12.8 12.8 11.8 12.7 11.7 11.5 10.6 11.7 10.8 43.81 35.32 34.33 50.47 48.71 52.83 76.81
DML 162/162s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 7.68 5.43 5.26 8.31 7.85 8.01 11.75
DML 162.5s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 10.57 7.36 7.12 11.36 10.69 10.83 15.91
DML 163/163s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6 16.33 11.18 10.82 17.41 16.33 16.43 24.16
DML 164/164s 27.7 26.2 29.8 28.3 30.4 28.0 28.1 26.0 27.8 25.7 25.3 23.3 25.6 23.6…
