COFI TRE 820 Piso gas transformer 4-wire molded cable

DATA SHEET TRE820PISO Description: TR.E 230V 50/60Hz 1/0,8A 1x8kV 20mA 19% C.440VIRAS GENERAL CHARACTERISTICS The ignition transformer is CE marked, It undergo to the European low voltage directives 2014/35/EU and in particular the directives EN61558-2-3:2011-04 and EN60730-2-5:2002; it is made in compliance with the electromagnetic compliance 2014/30/EU and the directive EN61000-3-2:2006/A2:2009 and EN61000-3-3:2008. By using the advised accessories the transformer is compliant with the prescription of the generic standard EN 55014-1:2006/A1:2009 and EN55014-2:1997/A2:2008. Every single transformer, at the end of its production cycle, is tested as reported on the table below. The ignition transformer shall be used with a control unit. An high voltage symbol with yellow color filling has to be applied outside of the device where the transformer is mounted. RATED DATA Primary Supply Voltage E [V] 230 V Frequency [Hz] 50/60 Hz Primary Current [A] 1/0,8 A Apparent Power [VA] 230/184 VA Secondary Voltage at open circuit RMS [kV ]±10% 1x8 kV Secondary Peak Voltage at open circuit [kV] 11,31 kV Secondary Current in short circuit RMS [mA] ±10% 20 mA Duty Cycle 19% on su 3' Approvals MECHANICAL DATA External enclosure Epoxy thermosetting resin High Voltage output VIRAS High Voltage connections Screws Ambient Temperature - Protection -20/85 °C Ta 35°C - IP 00 Packaging Scatola da 10 pezzi 10 pcs box Weight [kg] 1,306 Kg PRIMARY CONNECTIONS Low Voltage connection SIL.4X0,50 4PUNTALINI Cavo Cable Actual cable L. [mm] 380 mm Description SIL 4x0,50 4 END SPLICES TERMINALS 440 mm DIMENSIONS Note Date 15/01/2021 Paolo Comin