Inpro Tank alarm TANKALERT ATEX

ATEX Exi Ultrasonic sensor Our ATEX Ultrasonic sensor specifically designed to be a low profile, non-contact, continuous liquid level sensor. Applications • Liquid level monitoring • Water • Chemicals • Additives • Diesel fuel • Motor oil • Hydraulic fluid • Waste Oil •Other hazardous/non hazardous liquids • Works in conjunction with cellular Tekelek ATEX data logger Benefits • 5 year battery life – ATEX data logger • Accurate, reliable tank level reporting to server monitoring application • Spot and continuous inventory management • Configurable reporting schedule and alarms • Highly configurable server reporting interval from 2/hour to 1/month • With 3m interface cable • 28 slot logger with configurable logging interval • Programmable Alarms – High level – Low levels – Rate of level change (fill or drain) • IP68 protected • Temperature compensated • Minimum 1 year warranty • CE Conformance and ROHS Compliant • International Approvals  Specification Characteristic Dimensions 88mm (W) x 88mm (L) x 28mm (H) ±1mm (not including horn) Weight 100g Housing Material UV Stabilized Polypropylene Operating Temperature -20°C to 60°C (Note 1) Storage Temperature 0°C to 30°C (Note 1) Altitude Range <2Km above sea level Environmental Protection IP68 – Outdoors Gauge Type Ultrasonic Ultrasonic Range >12cm to <4M (Note 2) Ultrasonic Resolution ±1cm Accuracy ±2cm Material compatibility (Note 3) Power requirements 3.6V to 5.5V DC (Supplied by logger) Communications UART serial bidirectional communications TTL 3.3V level 1200 baud, no parity, 8 data bits ATEX approval IECEx II (1)G Ex ia[ia] IIB T4 [-20 < Ta < +60°C] – Zone 0 Humidity range 10% - 100% Accessories Gasket EPDM seal included Adapter 2” Multi thread adapter Conformity EMC directive 2014/30/EU The Electromagnetic Compatibility (EMC) Directive ensures that electrical and electronic equipment does not generate, or is not affected by, electromagnetic disturbance. The Low Voltage Directive (LVD) ensures that electrical equipment within certain voltage limits provides a high level of LVD directive 2014/35/EU protection for European citizens, and benefits fully from the Single Market. This Directive lays down rules on the restriction of the use of hazardous substances in electrical and electronic equipment RoHs directive 2011/65/EU (EEE) with a view to contributing to the protection of human health and the environment, including the environmentally sound recovery and disposal of waste EEE. EN 60079-11:2014 Electrical apparatus for explosive gas atmospheres - Part 0: General requirements EN 60079-11:2014 Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i’ EN 60079-18: 2014 Electrical apparatus for explosive gas atmospheres - Part 18: Encapsulation ‘m’ CE compliance Yes Note 1: Storage and operation above 20°C may reduce battery life. Minimum distance measured is derated with temperatures <0°C. Note 2: Based on a measurement to a flat liquid target of size 30cm2. Note 3: Suitable for use in tanks for the storage of water diesel fuel, kerosene, gas oil types A2,C1,C2 and D as defined by BS2869. ATEX TANKALERT NEW WIRELESS SOLUTIONS FOR HAZARDOUS RISK ZONES SPECIFICATION