BUNTING BEARINGS Thrust Washer: 3/8 in Bore, PTFE, JLON 4200, 3/4 in OD, 0.062 in Thick
The BUNTING BEARINGS Thrust Washer is a general purpose dry-run plastic thrust washer with a 3/8 in bore, 3/4 in OD, and 0.062 in thickness. Made from JLON 4200 PTFE material in red, this inch-system washer is ISO…
SKU 3G-OTH-98906
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The BUNTING BEARINGS Thrust Washer is a general purpose dry-run plastic thrust washer with a 3/8 in bore, 3/4 in OD, and 0.062 in thickness. Made from JLON 4200 PTFE material in red, this inch-system washer is ISO Certified 9001 and sold in a pack of 5 (MPN BJ4T061202).
Frequently Asked Questions
What is a BUNTING BEARINGS thrust washer used for?
A BUNTING BEARINGS thrust washer is a general purpose dry-run plastic washer used to reduce friction and wear between rotating or sliding surfaces in industrial machinery. It is suitable for applications where lubrication is limited or absent, such as conveyors, packaging equipment, and light-duty linear motion systems.
What are the specifications of the BUNTING BEARINGS thrust washer BJ4T061202?
The BUNTING BEARINGS thrust washer BJ4T061202 has a 3/8 in bore, 3/4 in OD, and 0.062 in thickness. It is made from JLON 4200 PTFE material in red, follows inch-system measurement, and is ISO Certified 9001. Sold in a pack of 5, it is designed for general purpose dry-run applications.
Where to buy BUNTING BEARINGS thrust washers worldwide?
3G Electric supplies BUNTING BEARINGS thrust washers worldwide, handling full logistics and customs clearance for international orders. As a global industrial solutions provider, we source and deliver genuine parts like the BJ4T061202 to support your maintenance and production needs across all regions.
How to install a BUNTING BEARINGS PTFE thrust washer?
To install a BUNTING BEARINGS PTFE thrust washer, ensure the shaft and housing bore are clean and free of burrs. Slide the washer over the shaft with the bore facing the mating surface. Apply light pressure to seat it evenly. Avoid over-tightening, as PTFE can deform under excessive load.
Used in
Common applications for BUNTING BEARINGSBUNTING BEARINGS Products
3G Electric supplies BUNTING BEARINGS general purpose dry-run plastic thrust washers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
