OEM Rope-Style Compression Packing Seals: Acrylic
The APPROVED VENDOR Rope-Style Compression Packing Seals: Acrylic are general service packings with an oil/wax lubricant, measuring 5/8 in by 25 ft L (MPN ZUSA-CP-373). They are not rated for standards or steam…
SKU 3G-OTH-92912
Also listed as: ZUSACP373 · ZUSA CP 373
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Rope-Style Compression Packing Seals: Acrylic are general service packings with an oil/wax lubricant, measuring 5/8 in by 25 ft L (MPN ZUSA-CP-373). They are not rated for standards or steam temperature maximum.
Frequently Asked Questions
What is APPROVED VENDOR rope-style compression packing used for?
APPROVED VENDOR rope-style compression packing seals are used in general service applications such as pumps and valves to prevent fluid leakage around rotating or reciprocating shafts. The acrylic construction with oil/wax lubricant suits moderate-temperature, non-steam environments where a flexible, easy-to-cut packing is needed.
What are the specifications of APPROVED VENDOR ZUSA-CP-373 packing?
The APPROVED VENDOR ZUSA-CP-373 is a 5/8 in diameter, 25 ft long rope-style compression packing made from acrylic with an oil/wax lubricant. It is classified as general service packing and is not rated for specific standards or maximum steam temperature. The manufacturer part number is ZUSA-CP-373.
Where to buy APPROVED VENDOR ZUSA-CP-373 packing worldwide?
3G Electric supplies APPROVED VENDOR ZUSA-CP-373 rope-style compression packing worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on this general service packing item.
How to install rope-style compression packing like ZUSA-CP-373?
To install rope-style compression packing, cut rings slightly longer than the shaft circumference using a sharp knife. Stagger the cuts 90 degrees apart when stacking rings in the stuffing box. Tighten the gland evenly until slight leakage occurs, then adjust after run-in. Always follow equipment manufacturer guidelines for proper installation.
OEM Products
3G Electric supplies OEM general service packing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
