OEM Compression Packing Ring: PTFE
The APPROVED VENDOR Compression Packing Ring is a PTFE-based packing ring (MPN ZUSA-CP-1280) with a 2 1/4 in OD and 1 1/2 in ID. It offers a pH range of 0–14 and a maximum steam temperature of 428°F.
SKU 3G-OTH-93996
Also listed as: ZUSACP1280 · ZUSA CP 1280
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Packing Ring is a PTFE-based packing ring (MPN ZUSA-CP-1280) with a 2 1/4 in OD and 1 1/2 in ID. It offers a pH range of 0–14 and a maximum steam temperature of 428°F.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Packing Ring used for?
The APPROVED VENDOR Compression Packing Ring (ZUSA-CP-1280) is used to seal rotating or reciprocating shafts in pumps, valves, and mixers. Its PTFE construction handles aggressive chemicals within a 0–14 pH range and steam up to 428°F, making it suitable for chemical processing, water treatment, and general industrial applications.
What are the specifications of the APPROVED VENDOR Compression Packing Ring?
The APPROVED VENDOR Compression Packing Ring (MPN ZUSA-CP-1280) has a PTFE base material, 2 1/4 in outer diameter, 1 1/2 in inner diameter, a pH range of 0–14, and a maximum steam temperature of 428°F. It is designed for high-temperature and chemically aggressive sealing environments.
Where to buy the APPROVED VENDOR Compression Packing Ring worldwide?
3G Electric supplies the APPROVED VENDOR Compression Packing Ring (ZUSA-CP-1280) worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this PTFE packing ring to any country.
How to install the APPROVED VENDOR Compression Packing Ring?
To install the APPROVED VENDOR Compression Packing Ring, cut the ring to fit the shaft diameter, then insert it into the stuffing box. Tighten the gland evenly to avoid excessive compression. For best results, follow standard packing installation practices and ensure the PTFE ring is lubricated if recommended by the manufacturer.
OEM Products
3G Electric supplies OEM packing rings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.