OEM High-Efficiency Heating Element, 4,500 W, 240V AC, Flange Mount, Copper Sheath
The APPROVED VENDOR Water Heater Element: LWD is a bolt-on, high-efficiency heating element with a copper sheath and flange mount. It operates at 240V AC and is rated for moderately hard water. The element includes a…
SKU 3G-OTH-447228
Also listed as: TG2457430035 · TG2457-430035
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Water Heater Element: LWD is a bolt-on, high-efficiency heating element with a copper sheath and flange mount. It operates at 240V AC and is rated for moderately hard water. The element includes a gasket and mounting hardware, with an insert length of 11.69 inches and a watt density class of LWD.
Frequently Asked Questions
What is the APPROVED VENDOR Water Heater Element used for?
This bolt-on heating element is used in commercial and residential water heaters to heat water efficiently. It is designed for moderately hard water conditions and operates at 240V AC with 4,500 W power. The copper sheath and flange mount make it suitable for replacement or new installations in standard water heater tanks.
What are the specifications of the APPROVED VENDOR Water Heater Element?
The element operates at 240V AC, 4,500 W, with a flange mount and copper sheath. It has an insert length of 11.69 inches, includes a gasket and mounting hardware, and is rated for moderately hard water. The watt density class is LWD, and the manufacturer part number is TG2457 430035.
Where to buy the APPROVED VENDOR Water Heater Element worldwide?
3G Electric supplies the APPROVED VENDOR Water Heater Element worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us to source this element with part number TG2457 430035 for your water heater needs.
How to install the APPROVED VENDOR Water Heater Element?
Turn off power and drain the tank. Remove the old element, clean the flange surface, and apply the included gasket. Insert the new element with the copper sheath into the tank opening, secure with mounting hardware, and tighten. Restore power and check for leaks. Always follow local electrical codes.
OEM Products
3G Electric supplies OEM high-efficiency heating elements. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.