OEM High-Efficiency Heating Element
The APPROVED VENDOR Water Heater Element: HWD is a high-efficiency heating element with a copper sheath and threaded pipe mount, rated at 3,500 W and 240V AC. It includes a gasket and mounting hardware, and is…
SKU 3G-OTH-447218
Also listed as: SG1353430326 · SG1353 430326
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Water Heater Element: HWD is a high-efficiency heating element with a copper sheath and threaded pipe mount, rated at 3,500 W and 240V AC. It includes a gasket and mounting hardware, and is designed for normal water hardness with a 12.56-inch insert length.
Frequently Asked Questions
What is the APPROVED VENDOR Water Heater Element HWD used for?
The APPROVED VENDOR Water Heater Element HWD is used as a replacement heating element in residential and commercial electric water heaters. It is designed for normal water hardness and provides 3,500 W of heating power at 240V AC, with a copper sheath for corrosion resistance.
What are the specifications of the APPROVED VENDOR Water Heater Element SG1353-430326?
The APPROVED VENDOR Water Heater Element SG1353-430326 is rated at 3,500 W and 240V AC. It features a threaded pipe mount, copper sheath, 12.56-inch insert length, and includes a gasket and mounting hardware. It is designed for normal water hardness.
Where to buy the APPROVED VENDOR Water Heater Element worldwide?
3G Electric supplies the APPROVED VENDOR Water Heater Element worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your location. Contact us to order the SG1353-430326 or similar heating elements for your application.
How to install the APPROVED VENDOR Water Heater Element?
To install the APPROVED VENDOR Water Heater Element, first drain the tank and disconnect power. Remove the old element, apply thread sealant to the new threaded pipe mount, and tighten securely. Reconnect wiring to 240V AC, install the included gasket, and refill before restoring power.
OEM Products
3G Electric supplies OEM high-efficiency heating elements. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.