OEM Quick Detachable Bushing: SD
The APPROVED VENDOR Quick Detachable Bushing, model SDX1-5/16, is an inch-type bushing with a 1 5/16 in bore diameter and 1.813 in overall length, featuring a taper of 3/4 in per ft. 3G Electric sources this genuine…
SKU 3G-OTH-132716
Also listed as: SDX1516 · SDX1 5 16 · SDX1-5-16
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Quick Detachable Bushing, model SDX1-5/16, is an inch-type bushing with a 1 5/16 in bore diameter and 1.813 in overall length, featuring a taper of 3/4 in per ft. 3G Electric sources this genuine industrial component across 14 departments, with specialist expertise in power transmission components like bushings, supported by authorized distributor relationships.
Frequently Asked Questions
What is the APPROVED VENDOR Quick Detachable Bushing SDX1-5/16 used for?
This bushing is used to mount pulleys, sprockets, or sheaves onto shafts in power transmission systems. It is common in industrial machinery, conveyors, and agricultural equipment where a secure, removable fit is needed. The SD design allows quick installation and removal without damaging the shaft.
What are the specifications of the APPROVED VENDOR SDX1-5/16 bushing?
The bushing has a 1 5/16 inch bore diameter, 1.813 inch overall length, and a taper of 3/4 inch per foot. It is an inch-series quick detachable bushing, model SDX1-5/16, designed for fractional-horsepower applications. The SD type uses a single-slot split design for easy tightening.
Where to buy the APPROVED VENDOR SDX1-5/16 bushing worldwide?
3G Electric supplies the APPROVED VENDOR SDX1-5/16 bushing to customers worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your location. Contact our team for a quote and lead time on this bushing.
How to install the APPROVED VENDOR SD bushing?
Slide the bushing onto the shaft with the bore aligned, then place the mating component over the bushing. Tighten the screws evenly to draw the component onto the taper. For removal, loosen the screws and use the jacking holes to separate the bushing from the component. Always follow the manufacturer's torque specifications.
OEM Products
3G Electric supplies OEM quick detachable bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
