OEM Quick Detachable Bushing: SDS
The APPROVED VENDOR Quick Detachable Bushing (SDS, MPN SDS78) is an inch-type bushing with a 7/8 in bore diameter and 1.313 in overall length, featuring a 3/4 in per ft taper. 3G Electric interprets customer demand…
SKU 3G-OTH-114043
Also listed as: SDS 78 · SDS-78
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Quick Detachable Bushing (SDS, MPN SDS78) is an inch-type bushing with a 7/8 in bore diameter and 1.313 in overall length, featuring a 3/4 in per ft taper. 3G Electric interprets customer demand and delivers this genuine industrial component across 14 departments — and far more — with specialist depth in combustion, pumps and controls as a trust anchor.
Frequently Asked Questions
What is the APPROVED VENDOR SDS78 quick detachable bushing used for?
The SDS78 quick detachable bushing is used to mount pulleys, sprockets, and couplings onto shafts in industrial power transmission systems. It provides a secure, taper-lock fit that simplifies installation and removal without damaging components, commonly applied in conveyors, pumps, and gearboxes.
What are the specifications of the APPROVED VENDOR SDS78 bushing?
The SDS78 bushing has a 7/8 in bore diameter, 1.313 in overall length, and a taper of 3/4 in per ft. It is an inch-series quick detachable bushing designed for SDS-style hubs. The manufacturer part number is SDS78, and it is supplied by APPROVED VENDOR.
Where to buy the APPROVED VENDOR SDS78 bushing worldwide?
3G Electric supplies the APPROVED VENDOR SDS78 bushing worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time; we source and deliver this bushing to any country.
How to install the APPROVED VENDOR SDS78 quick detachable bushing?
To install the SDS78 bushing, clean the shaft and hub bore, then slide the bushing onto the shaft. Align the hub and tighten the screws evenly to draw the taper into the hub. Use a torque wrench to the manufacturer's recommended value. For removal, loosen screws and use the jacking screws to separate the bushing from the hub.
OEM Products
3G Electric supplies OEM quick detachable bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
