OEM Split Taper Bushing: R2
The APPROVED VENDOR Split Taper Bushing: R2 is a split taper bushing with an 80 mm bore diameter and a 4.63 in bolt circle diameter. It features a taper of 3/4 in per ft and is identified by manufacturer part number…
SKU 3G-OTH-119795
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Split Taper Bushing: R2 is a split taper bushing with an 80 mm bore diameter and a 4.63 in bolt circle diameter. It features a taper of 3/4 in per ft and is identified by manufacturer part number R2x80mm. This metric bushing is designed for industrial shaft-mounting applications.
Frequently Asked Questions
What is the APPROVED VENDOR Split Taper Bushing R2x80mm used for?
The APPROVED VENDOR Split Taper Bushing R2x80mm is used to mount industrial components such as pulleys, sprockets, and couplings onto shafts. Its split design and 3/4 in per ft taper provide a secure, concentric grip, making it suitable for power transmission applications in conveyors, pumps, and gearboxes.
What are the specifications of the APPROVED VENDOR Split Taper Bushing R2x80mm?
The APPROVED VENDOR Split Taper Bushing R2x80mm has an 80 mm bore diameter, a 4.63 in bolt circle diameter, and a taper of 3/4 in per ft. It is a metric type bushing with manufacturer part number R2x80mm. The R2 series is designed for industrial shaft-mounting applications requiring precise alignment.
Where to buy the APPROVED VENDOR Split Taper Bushing R2x80mm worldwide?
You can source the APPROVED VENDOR Split Taper Bushing R2x80mm through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide competitive pricing for this metric bushing.
How to install the APPROVED VENDOR Split Taper Bushing R2x80mm?
To install the APPROVED VENDOR Split Taper Bushing R2x80mm, clean the shaft and bushing bore, then slide the bushing onto the shaft. Align the bolt holes and tighten the screws evenly to draw the taper into the hub. Use a torque wrench to the manufacturer's recommended value. Always check alignment before final tightening.
OEM Products
3G Electric supplies OEM split taper bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
