OEM Split Taper Bushing: R2
The APPROVED VENDOR Split Taper Bushing, model R2, is a split taper bushing with a 1 15/16-inch bore diameter and a 4.63-inch bolt circle diameter. It features a taper of 3/4 inch per foot and is designed for…
SKU 3G-OTH-116174
Also listed as: R2x11516 · R2x1 15 16 · R2x1-15-16
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Split Taper Bushing, model R2, is a split taper bushing with a 1 15/16-inch bore diameter and a 4.63-inch bolt circle diameter. It features a taper of 3/4 inch per foot and is designed for inch-system applications. This component is identified by manufacturer part number R2x1-15/16.
Frequently Asked Questions
What is an APPROVED VENDOR Split Taper Bushing used for?
An APPROVED VENDOR Split Taper Bushing is used to mount pulleys, sprockets, and couplings onto shafts in power transmission systems. It provides a secure, concentric grip that simplifies installation and removal, commonly applied in conveyors, pumps, and industrial machinery.
What are the specifications of the APPROVED VENDOR R2 Split Taper Bushing?
The APPROVED VENDOR R2 Split Taper Bushing has a 1 15/16-inch bore diameter, a 4.63-inch bolt circle diameter, and a taper of 3/4 inch per foot. It is designed for inch-system applications and carries manufacturer part number R2x1-15/16.
Where to buy APPROVED VENDOR Split Taper Bushings worldwide?
You can source APPROVED VENDOR Split Taper Bushings worldwide through 3G Electric. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time.
How to install an APPROVED VENDOR Split Taper Bushing?
To install an APPROVED VENDOR Split Taper Bushing, clean the shaft and bushing bore, then slide the bushing onto the shaft. Align the mating component, insert and tighten the screws evenly to draw the bushing into the hub. Use a torque wrench to the manufacturer's recommended value.
OEM Products
3G Electric supplies OEM split taper bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
