OEM Split Taper Bushing: P1
The APPROVED VENDOR Split Taper Bushing, model P1, is a split taper bushing designed for inch-system shaft mounting. It features a 1 5/16-inch bore diameter, a 2.44-inch bolt circle diameter, and a taper of 3/4 inch…
SKU 3G-OTH-116543
Also listed as: P1X1516 · P1X1 5 16 · P1X1-5-16
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Split Taper Bushing, model P1, is a split taper bushing designed for inch-system shaft mounting. It features a 1 5/16-inch bore diameter, a 2.44-inch bolt circle diameter, and a taper of 3/4 inch per foot. This component is identified by manufacturer part number P1X1-5/16.
Frequently Asked Questions
What is an APPROVED VENDOR Split Taper Bushing used for?
An APPROVED VENDOR Split Taper Bushing, model P1, is used to mount pulleys, sprockets, and couplings onto inch-system shafts. It provides a secure, concentric fit with a 3/4 in per ft taper, commonly applied in power transmission systems across material handling, machining, and industrial equipment.
What are the specifications of the APPROVED VENDOR P1 Split Taper Bushing?
The APPROVED VENDOR P1 Split Taper Bushing has a 1 5/16 in bore diameter, a 2.44 in bolt circle diameter, and a taper of 3/4 in per ft. It is an inch-system component with manufacturer part number P1X1-5/16, designed for secure shaft mounting in industrial drives.
Where to buy APPROVED VENDOR Split Taper Bushings worldwide?
3G Electric supplies APPROVED VENDOR Split Taper Bushings worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to source the P1X1-5/16 or other taper bushing sizes for your power transmission needs.
How to install an APPROVED VENDOR Split Taper Bushing?
To install an APPROVED VENDOR Split Taper Bushing, clean the shaft and bushing bore, then slide the bushing onto the shaft. Align the bolt holes, insert and tighten the screws evenly to draw the taper tight. Always follow the manufacturer's torque specifications for the P1 series to ensure proper clamping force.
OEM Products
3G Electric supplies OEM split taper bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
