OEM APPROVED VENDOR Low-Lead Standard Sleeve Brass Compression Fitting
The APPROVED VENDOR Compression Fitting Elbow (MPN 700069-0806) is a low-lead standard sleeve brass compression fitting with a 1/2 in OD x 3/8 in pipe fitting size and Compression x MNPT type. 3G Electric interprets…
SKU 3G-OTH-470968
Also listed as: 7000690806 · 700069 0806
Local availability & support
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Ask a question
Request a QuoteAsk a question
Product Description
The APPROVED VENDOR Compression Fitting Elbow (MPN 700069-0806) is a low-lead standard sleeve brass compression fitting with a 1/2 in OD x 3/8 in pipe fitting size and Compression x MNPT type. 3G Electric interprets your demand for this fitting, sources it from our extensive network across 14 industrial departments, and provides specialist support in combustion, pumps, and controls to ensure you get the right solution.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Fitting Elbow 700069-0806 used for?
This low-lead standard sleeve brass compression elbow connects 1/2 in OD tubing to a 3/8 in male NPT threaded port. It is commonly used in instrumentation, pneumatic, and hydraulic systems where a leak-tight, vibration-resistant joint is required in potable water or low-lead applications.
What are the specifications of the APPROVED VENDOR 700069-0806 compression fitting?
The fitting is a Compression x MNPT elbow with a 1/2 in OD tube size and 3/8 in pipe thread. It is made of low-lead brass with a standard sleeve design. The manufacturer part number is 700069-0806, and the brand is APPROVED VENDOR.
Where to buy the APPROVED VENDOR 700069-0806 compression fitting worldwide?
3G Electric supplies the APPROVED VENDOR 700069-0806 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us to place an order or request a quote for this low-lead brass fitting.
How to install the APPROVED VENDOR compression fitting elbow?
Slide the compression nut and sleeve onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand followed by a wrench turn per manufacturer guidelines. Do not overtighten. For MNPT threads, use thread sealant on the male pipe end. Always verify low-lead compliance for potable systems.
OEM Products
3G Electric supplies OEM low-lead standard sleeve brass compression fitting. We supply genuine products and their technical documentation.