Goods are offered EXW Singapore — collection from our Singapore facility.

3G Electric
OEM Graphite Spiral-Wound Gasket - Graphite Spiral-Wound Gaskets
OEMGraphite Spiral-Wound Gaskets

OEM Graphite Spiral-Wound Gasket

The Spiral Wound Flange Gasket with Graphite Filler (SKU 304-300-0400, MPN 304-300-0400) is a graphite spiral-wound gasket designed for 4-inch pipe, featuring a 5-inch ID and 304 stainless steel winding.

SKU 3G-OTH-466265

Also listed as: 3043000400 · 304 300 0400

Brand
OEM
Item
Graphite Spiral-Wound Gasket
Part Number
304-300-0400
Category
Graphite Spiral-Wound Gaskets
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support

Payment
Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.

Compliance & shipping

Hazardous material
Not classified as hazardous
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

OEM
Manufacturer Part Number
304-300-0400
Type
For 4 in Pipe
ID
5 in
UNSPSC
31181503
Standards
ASME B16.20; ASME B16.5; ASME/ANSI
Thickness
3/16 in
Catalog Page
N/A
FDA Approved
No FDA Approved Meets FDA standards for use in food, beverage, and pharmaceutical applications.
Stripe Color
Gray Stripe Color The color of the intermittent stripe along the outside rim, or edge, of the gasket indicates the filler material of the gasket.
For Pipe Size
4 in For Pipe Size The nominal pipe size that fits the gasket. This is not a measurement but an industry-accepted standardized size based on the pipe's inside diameter (ID).
Filler Material
Graphite
Inside Diameter
5 in Inside Diameter
Outside Diameter
7-1/8 in Outside Diameter
Winding Material
304 Stainless Steel
Country of Origin
Varies (subject to change)
Outside Rim Color
Yellow Outside Rim Color The color of the outside rim, or edge, of the gasket indicates the metallic winding material of the gasket.
Inside Ring Material
None
For Flange ANSI Class
300
Outside Ring Material
Carbon Steel
Stainless Steel Winding
304
Maximum Operating Temperature
842 °F
Minimum Operating Temperature
-320 °F

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Ask a question

Request a Quote

Ask a question

OEM Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The Spiral Wound Flange Gasket with Graphite Filler (SKU 304-300-0400, MPN 304-300-0400) is a graphite spiral-wound gasket designed for 4-inch pipe, featuring a 5-inch ID and 304 stainless steel winding.

Frequently Asked Questions

What is the spiral wound flange gasket used for?

This gasket seals flanged joints in piping systems handling high-pressure or high-temperature fluids. It is commonly used in industrial applications such as refineries, chemical plants, and power generation where a reliable, leak-resistant seal is required.

What are the specifications of the 304-300-0400 gasket?

This spiral wound gasket has a graphite filler and 304 stainless steel winding. It is designed for 4-inch pipe with a 5-inch inner diameter. The manufacturer part number is 304-300-0400, and it is supplied by .

Where to buy the spiral wound flange gasket worldwide?

3G Electric supplies this gasket worldwide, handling full logistics and customs clearance. As a global industrial solutions provider, we source and deliver genuine parts to any location, ensuring compliance with international shipping requirements.

How to install a spiral wound flange gasket?

Ensure flange faces are clean and free of debris. Center the gasket between flanges, then tighten bolts in a star pattern to the manufacturer's recommended torque. Avoid over-compression, which can damage the winding. Always follow piping system best practices for gasket installation.

Not sure this is the right part? Photo-identify it→

OEM Products

3G Electric supplies OEM graphite spiral-wound gaskets. We supply genuine products and their technical documentation.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Compatible alternatives & equivalents

Cross-referenced by specification & description
Spiral-flute tap for threading blind holes in steel and stainless steel. The spiral flute design evacuates chips upward, preventing clogging and enabling clean threads in materials that produce long, stringy chips. Suitable for general manufacturing applications
OSG
Spiral-flute tap for threading blind holes in steel and stainless steel. The spiral flute design evacuates chips upward, preventing clogging and enabling clean threads in materials that produce long, stringy chips. Suitable for general manufacturing applications
Spiral-flute tap for threading blind holes in steel and stainless steel. The spiral flute design lifts chips upward, preventing clogging in deep holes. Thread size #4-40 UNC, tolerance class H2 / 2B-3B, 3 flutes, bottoming chamfer. Manufacturer part number 0135608
OSG
Spiral-flute tap for threading blind holes in steel and stainless steel. The spiral flute design lifts chips upward, preventing clogging in deep holes. Thread size #4-40 UNC, tolerance class H2 / 2B-3B, 3 flutes, bottoming chamfer. Manufacturer part number 0135608
OSG SPIRAL FLUTE
OSG SPIRAL FLUTE
Spiral-flute tap for threading blind holes in steel and stainless steel. Features a 2-flute design with bottoming chamfer for forward chip evacuation. Thread size #8-32 UNC with H4 tolerance for 2B-3B class threads
OSG SPIRAL FLUTE
OSG SPIRAL FLUTE
Spiral-flute tap for threading blind holes in steel and stainless steel. #6-32 UNC thread size, H4 / 2B-3B thread class, 2 flutes, bottoming chamfer. Spiral flute design evacuates chips upward to prevent clogging in deep or blind-hole applications
OSG Spiral Flute Tap: #4-40 UNC, H3 / 2B-3B, 3 Flute, Bottoming Chamfer (MPN 0135708)
OSG
OSG Spiral Flute Tap: #4-40 UNC, H3 / 2B-3B, 3 Flute, Bottoming Chamfer (MPN 0135708)
OSG SPIRAL FLUTE
OSG SPIRAL FLUTE
Spiral-flute tap for threading blind holes in steel and stainless steel. Features a 3/8"-24 UNF thread size, H4 / 2B-3B tolerance, 3 flutes, and a bottoming chamfer. The spiral-flute geometry evacuates chips upward, suitable for CNC and manual tapping operations where chip clearance is critical

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first