ANVIL Metal Pipe Elbow: 4 in x 4 in, Threaded x Threaded, Class 150, 300 psi @ 150° F
The ANVIL Metal Pipe Elbow is a 4 in x 4 in, 45° threaded x threaded medium-pressure pipe fitting, Class 150, with a maximum operating pressure of 300 psi @ 150° F (MPN 0310025200). 3G Electric interprets this demand…
SKU 3G-OTH-654505
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Metal Pipe Elbow is a 4 in x 4 in, 45° threaded x threaded medium-pressure pipe fitting, Class 150, with a maximum operating pressure of 300 psi @ 150° F (MPN 0310025200). 3G Electric interprets this demand and delivers it across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Frequently Asked Questions
What is the ANVIL 4 in x 4 in metal pipe elbow used for?
This ANVIL 45° threaded elbow connects two pipes at a 45-degree angle in medium-pressure piping systems. It is commonly used in industrial plumbing, HVAC, and process lines where Class 150 fittings are specified. 3G Electric supplies this fitting across 14 industrial departments, with specialist depth in combustion, pumps and controls.
What are the specifications of the ANVIL 0310025200 pipe elbow?
The ANVIL metal pipe elbow has a 4 in x 4 in threaded x threaded connection, Class 150 rating, and a maximum operating pressure of 300 psi @ 150 °F. It is a 45° elbow, MPN 0310025200. 3G Electric sources this genuine ANVIL fitting for worldwide delivery, handling logistics and customs.
Where to buy the ANVIL 4 in threaded pipe elbow worldwide?
3G Electric supplies the ANVIL 4 in x 4 in threaded pipe elbow (MPN 0310025200) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this Class 150, 300 psi @ 150 °F fitting.
How to install a threaded ANVIL pipe elbow?
Apply pipe thread sealant or PTFE tape to the male threads, then hand-tighten the ANVIL elbow onto the pipe. Use a wrench for final tightening — avoid overtightening to prevent cracking. For Class 150 fittings, ensure the system pressure does not exceed 300 psi @ 150 °F. 3G Electric can advise on proper selection.
ANVIL Products
3G Electric supplies ANVIL medium-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
