ANVIL Metal Pipe Elbow: 1/2 in x 1/4 in, Threaded x Threaded, Class 125, 175 psi @ 150° F
The ANVIL Metal Pipe Elbow (SKU 3G-OTH-653894) is a 1/2 in x 1/4 in, 90° low-pressure threaded pipe fitting with Threaded x Threaded connections, Class 125, rated for 175 psi @ 150° F (MPN 0300012002). 3G Electric…
SKU 3G-OTH-653894
Local availability & support
- Delivery
- Worldwide DHL shipping from Singapore; 7–14 business days door-to-door for most destinations.
- Payment
- Invoicing in USD. Bank transfer (SWIFT) and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ANVIL Metal Pipe Elbow (SKU 3G-OTH-653894) is a 1/2 in x 1/4 in, 90° low-pressure threaded pipe fitting with Threaded x Threaded connections, Class 125, rated for 175 psi @ 150° F (MPN 0300012002). 3G Electric sources this genuine industrial fitting across 14 departments — and far more — with specialist trust anchored in combustion, pumps and controls.
Frequently Asked Questions
What is the ANVIL 1/2 in x 1/4 in metal pipe elbow used for?
This ANVIL 90° elbow connects two pipes of different diameters in low-pressure plumbing, steam, or air systems. It is rated Class 125 with a maximum operating pressure of 175 psi @ 150° F, making it suitable for industrial water, oil, or gas lines where a directional change is needed.
What are the specifications of the ANVIL metal pipe elbow 0300012002?
The ANVIL metal pipe elbow (MPN 0300012002) is a 1/2 in x 1/4 in, 90° fitting with Threaded x Threaded connections. It is Class 125 rated, with a maximum operating pressure of 175 psi @ 150° F. 3G Electric supplies this genuine ANVIL fitting for industrial applications worldwide.
Where to buy the ANVIL 1/2 x 1/4 pipe elbow in worldwide?
3G Electric supplies the ANVIL metal pipe elbow (SKU 3G-OTH-653894) to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery for this Class 125 threaded fitting. Contact us to order the 0300012002 for your low-pressure piping needs.
How to install a threaded pipe elbow like the ANVIL 0300012002?
Apply pipe thread sealant or PTFE tape to the male threads, then hand-tighten the ANVIL elbow onto both pipes. Use a wrench for final snugging—avoid overtightening to prevent cracking. This 90° elbow is rated for 175 psi @ 150° F; ensure system pressure does not exceed that limit.
ANVIL Products
3G Electric supplies ANVIL low-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
